On Wed, May 6, 2015 at 6:43 AM, Thierry Reding <thierry.reding@xxxxxxxxx> wrote: > From: Thierry Reding <treding@xxxxxxxxxx> > > Benson Leung pointed out that the kerneldoc for this structure has > become stale. Update the field descriptions to match the structure > content. > > Reported-by: Benson Leung <bleung@xxxxxxxxxxxx> > Signed-off-by: Thierry Reding <treding@xxxxxxxxxx> > --- > drivers/clk/tegra/clk.h | 16 +++++++++++++--- > 1 file changed, 13 insertions(+), 3 deletions(-) > > diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h > index f3782dedbdfb..c47e633616be 100644 > --- a/drivers/clk/tegra/clk.h > +++ b/drivers/clk/tegra/clk.h > @@ -157,7 +157,7 @@ struct div_nmp { > }; > > /** > - * struct clk_pll_params - PLL parameters > + * struct tegra_clk_pll_params - PLL parameters > * > * @input_min: Minimum input frequency > * @input_max: Maximum input frequency > @@ -168,12 +168,22 @@ struct div_nmp { > * @base_reg: PLL base reg offset > * @misc_reg: PLL misc reg offset > * @lock_reg: PLL lock reg offset > - * @lock_bit_idx: Bit index for PLL lock status > + * @lock_mask: Bitmask for PLL lock status > * @lock_enable_bit_idx: Bit index to enable PLL lock > + * @iddq_reg: PLL IDDQ register offset > + * @iddq_bit_idx: Bit index to enable PLL IDDQ > + * @aux_reg: AUX register offset > + * @dyn_ramp_reg: Dynamic ramp control register offset > + * @ext_misc_reg: Miscellaneous control register offsets > + * @pmc_divnm_reg: n, m divider PMC override register offset (PLLM) > + * @pmc_divp_reg: p divider PMC override register offset (PLLM) > + * @flags: PLL flags > + * @stepa_shift: Dynamic ramp step A field shift > + * @stepb_shift: Dynamic ramp step B field shift > * @lock_delay: Delay in us if PLL lock is not used Missed a couple - @max_p: @pdiv_tohw: Thanks! -- Benson Leung Software Engineer, Chrom* OS bleung@xxxxxxxxxxxx -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html