On Fri, Apr 10, 2015 at 11:36:03PM +0200, Marcel Ziswiler wrote:
> From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
>
> Activate STMPE811 touch controller as found on Colibri T30 modules.
> While at it change order of HDMI sub nodes as well to be more in line
> with Apalis T30.
> While at it also update comment about supported module hardware
> versions.
>
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
>
> coli
> ---
> arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 4 +--
> arch/arm/boot/dts/tegra30-colibri.dtsi | 44 +++++++++++++++++++++++++--
> 2 files changed, 44 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
> index 4d3ddc5..d42c400 100644
> --- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
> +++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
> @@ -55,7 +55,7 @@
>
> /* M41T0M6 real time clock on carrier board */
> rtc@68 {
> - compatible = "stm,m41t00";
> + compatible = "st,m41t00";
> reg = <0x68>;
> };
> };
This change isn't documented in the commit message.
> @@ -84,7 +84,7 @@
> };
> };
>
> - sdhci@78000200 {
> + sdmmc: sdhci@78000200 {
> status = "okay";
> bus-width = <4>;
> cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
Do you actually need this label? I suspect not, and I would suspect that
you don't need it on Apalis either, so I think a better patch would just
remove it from Apalis as well.
> diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
> index c4ed1be..5f7f4a0 100644
> --- a/arch/arm/boot/dts/tegra30-colibri.dtsi
> +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
> @@ -3,7 +3,7 @@
>
> /*
> * Toradex Colibri T30 Device Tree
> - * Compatible for Revisions 1.1B/1.1C/1.1D
> + * Compatible for Revisions V1.1B, V1.1C, V1.1D, V1.1E; IT: V1.1A
> */
> / {
> model = "Toradex Colibri T30";
> @@ -18,9 +18,9 @@
> vdd-supply = <&sys_3v3_reg>;
> pll-supply = <&vio_reg>;
>
> + nvidia,ddc-i2c-bus = <&hdmiddc>;
> nvidia,hpd-gpio =
> <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
> - nvidia,ddc-i2c-bus = <&hdmiddc>;
> };
> };
There's too many changes crammed into this commit for my taste. Can you
please separate these out into smaller commits and resend?
Thierry
Attachment:
pgpSRLPWTvVpm.pgp
Description: PGP signature
