On Tue, 17 Mar 2015, Russell King - ARM Linux wrote: > On Tue, Mar 17, 2015 at 01:32:21AM -0700, Paul Walmsley wrote: > > Required properties: > > - compatible : For Tegra20, must contain "nvidia,tegra20-ahb". For > > - Tegra30, must contain "nvidia,tegra30-ahb". Otherwise, must contain > > - '"nvidia,<chip>-ahb", "nvidia,tegra30-ahb"' where <chip> is tegra124, > > - tegra132, or tegra210. > > -- reg : Should contain 1 register ranges(address and length) > > + Tegra30, must contain "nvidia,tegra30-ahb". For Tegra114 and Tegra124, must > > + contain '"nvidia,<chip>-ahb", "nvidia,tegra30-ahb"' where <chip> is tegra114 > > + or tegra124. For Tegra132, the compatible string must contain > > + "nvidia,tegra132-ahb". > > + > > +- reg : Should contain 1 register ranges(address and length). On Tegra20, > > + Tegra30, Tegra114, and Tegra124 chips, the low byte of the physical base > > + address of the IP block must end in 0x04. On DT files for later chips, the > > + actual hardware base address of the IP block should be used. > > You could check that in the driver. If you can check it in the driver, > you can also decide to ignore it if it were offset by 0x04 (possibly > printing a warning.) That opens up the ability to fix the older Tegra > DT files going forward while still remaining compatible with existing > DT files, and avoiding the need for a complex note about this. That's fine, I'll do that and drop this patch. - Paul -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
