This block gathers statistics about various counters and can be configured to
fire interrupts when thresholds are crossed.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@xxxxxxxxxxxxx>
Reviewed-by: Alexandre Courbot <acourbot@xxxxxxxxxx>
---
v6: * Wrap a few lines at 80
* Fix paths to other bindings
* Remove operating-points property
v2: * Add operating-points property
---
.../devicetree/bindings/arm/tegra/actmon.txt | 28 ++++++++++++++++++++++
1 file changed, 28 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/tegra/actmon.txt
diff --git a/Documentation/devicetree/bindings/arm/tegra/actmon.txt b/Documentation/devicetree/bindings/arm/tegra/actmon.txt
new file mode 100644
index 0000000..adb60da
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/actmon.txt
@@ -0,0 +1,28 @@
+Tegra124 Activity Monitor
+
+Required properties:
+
+- compatible: should be "nvidia,tegra124-actmon"
+- reg: offset and length of the register set for the device
+- interrupts: standard interrupt property
+- clocks: Must contain a phandle and clock specifier pair for each entry in
+clock-names. See ../../clock/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+ - actmon
+ - emc
+- resets: Must contain an entry for each entry in reset-names. See
+../../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+ - actmon
+
+Example:
+ actmon@6000c800 {
+ compatible = "nvidia,tegra124-actmon";
+ reg = <0x0 0x6000c800 0x0 0x400>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA124_CLK_ACTMON>,
+ <&tegra_car TEGRA124_CLK_EMC>;
+ clock-names = "actmon", "emc";
+ resets = <&tegra_car 119>;
+ reset-names = "actmon";
+ };
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
