From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
Allow for a warm reset GPIO to be passed to the PMC driver via DT
which will be used to reset the system instead of writing to PMC_CTRL.
The GPIO will be asserted at reset time and, if this fails to reset
the system, we'll fall back to using PMC_CTRL.
Signed-off-by: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
[tomeu.vizoso@xxxxxxxxxxxxx: Rebased]
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@xxxxxxxxxxxxx>
---
.../bindings/arm/tegra/nvidia,tegra20-pmc.txt | 1 +
drivers/soc/tegra/pmc.c | 33 ++++++++++++++++++++++
2 files changed, 34 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
index 02c2700..ee5568f 100644
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
@@ -34,6 +34,7 @@ Optional properties:
- nvidia,combined-power-req : Boolean, combined power request for CPU & Core
- nvidia,cpu-pwr-good-en : Boolean, CPU power good signal (from PMIC to PMC)
is enabled.
+- nvidia,reset-gpio : GPIO that can be used to warm reset the system.
Required properties when nvidia,suspend-mode is specified:
- nvidia,cpu-pwr-good-time : CPU power good time in uS.
diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c
index c956395..effed0c 100644
--- a/drivers/soc/tegra/pmc.c
+++ b/drivers/soc/tegra/pmc.c
@@ -24,10 +24,12 @@
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/export.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/of_gpio.h>
#include <linux/platform_device.h>
#include <linux/reboot.h>
#include <linux/reset.h>
@@ -127,6 +129,8 @@ struct tegra_pmc_soc {
* @lp0_vec_phys: physical base address of the LP0 warm boot code
* @lp0_vec_size: size of the LP0 warm boot code
* @powergates_lock: mutex for power gate register access
+ * @reset_gpio: GPIO to assert to reset the system
+ * @reset_active_low: Reset GPIO is active-low
*/
struct tegra_pmc {
struct device *dev;
@@ -149,6 +153,9 @@ struct tegra_pmc {
bool cpu_pwr_good_en;
u32 lp0_vec_phys;
u32 lp0_vec_size;
+ int reset_gpio;
+ bool reset_active_low;
+
struct mutex powergates_lock;
};
@@ -386,6 +393,17 @@ void tegra_pmc_restart(enum reboot_mode mode, const char *cmd)
{
u32 value;
+ /*
+ * If there's a reset GPIO, attempt to use that first and then fall
+ * back to PMC reset if that fails.
+ */
+ if (gpio_is_valid(pmc->reset_gpio)) {
+ value = pmc->reset_active_low ? 0 : 1;
+ gpio_direction_output(pmc->reset_gpio, value);
+ udelay(100);
+ pr_err("GPIO reset failed; using PMC reset...\n");
+ }
+
value = tegra_pmc_readl(PMC_SCRATCH0);
value &= ~PMC_SCRATCH0_MODE_MASK;
@@ -629,6 +647,8 @@ void tegra_pmc_enter_suspend_mode(enum tegra_suspend_mode mode)
static int tegra_pmc_parse_dt(struct tegra_pmc *pmc, struct device_node *np)
{
u32 value, values[2];
+ enum of_gpio_flags flags;
+ int err;
if (of_property_read_u32(np, "nvidia,suspend-mode", &value)) {
} else {
@@ -695,6 +715,19 @@ static int tegra_pmc_parse_dt(struct tegra_pmc *pmc, struct device_node *np)
pmc->lp0_vec_phys = values[0];
pmc->lp0_vec_size = values[1];
+ pmc->reset_gpio = of_get_named_gpio_flags(np, "nvidia,reset-gpio",
+ 0, &flags);
+ if (gpio_is_valid(pmc->reset_gpio)) {
+ err = gpio_request_one(pmc->reset_gpio, GPIOF_OUT_INIT_HIGH,
+ "soc-warm-reset");
+ if (err) {
+ pr_err("Failed to request reset GPIO: %d\n", err);
+ pmc->reset_gpio = -1;
+ }
+ if (flags & OF_GPIO_ACTIVE_LOW)
+ pmc->reset_active_low = true;
+ }
+
return 0;
}
--
1.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
