On 6 January 2015 at 18:09, Stephen Warren <swarren@xxxxxxxxxxxxx> wrote: > On 01/06/2015 03:37 AM, Tomeu Vizoso wrote: >> >> Following 6dbaff2b, the kernel expects that the bootloader has correctly >> programmed the Tegra pinmux. >> >> DTs for the Jetson and the Venice2 had been updated already but this one >> was left behind. > > > So this setup is true for NVIDIA-controlled development/reference boards > where we've ensured that the bootloader sets up 100% of the pinmux. > > However, I know that Coreboot on this board doesn't set up everything in the > pinmux, and since it's in r/o flash never will. As such, I'm not sure this > change is safe for this board. That is, unless you want to force upstream > kernels to be booted via a chain-loaded path: Coreboot (r/o) -> U-Boot (r/w > with full pinmux setup) -> kernel. > >> Have tested this with the stock vendor firmware (coreboot) and have found >> no >> issues. > > > There are presumably a bunch of features which aren't yet supported > upstream, and hence you couldn't test though? That means we might find that > parts of the pinmux aren't yet programmed but need to be to enable those > features. Sure, there's no chance that my testing could have been extensive enough. Following Andrew's feedback, I will be looking at getting the pinmux programming right in the DTs. Thanks, Tomeu > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
