Re: [PATCH 1/11] ARM: tegra: add function to control the GPU rail clamp

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12/24/2014 09:16 PM, Lucas Stach wrote:
Am Dienstag, den 23.12.2014, 18:39 +0800 schrieb Vince Hsu:
The Tegra124 and later Tegra SoCs have a sepatate rail gating register
to enable/disable the clamp. The original function
tegra_powergate_remove_clamping() is not sufficient for the enable
function. So add a new function which is dedicated to the GPU rail
gating. Also don't refer to the powergate ID since the GPU ID makes no
sense here.

Signed-off-by: Vince Hsu <vinceh@xxxxxxxxxx>
To be honest I don't see the point of this patch.
You are bloating the PMC interface by introducing another exported
function that does nothing different than what the current function
already does.

If you need a way to assert the clamp I would have expected you to
introduce a common function to do this for all power partitions.
I thought about adding an tegra_powergate_assert_clamping(), but that doesn't make sense to all the power partitions except GPU. Note the difference in TRM. Any suggestion for the common function?

Other comments inline.

Regards,
Lucas

---
  drivers/soc/tegra/pmc.c | 34 +++++++++++++++++++++++-----------
  include/soc/tegra/pmc.h |  2 ++
  2 files changed, 25 insertions(+), 11 deletions(-)

diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c
index a2c0ceb95f8f..7798c530ead1 100644
--- a/drivers/soc/tegra/pmc.c
+++ b/drivers/soc/tegra/pmc.c
@@ -225,17 +225,6 @@ int tegra_powergate_remove_clamping(int id)
  		return -EINVAL;
/*
-	 * The Tegra124 GPU has a separate register (with different semantics)
-	 * to remove clamps.
-	 */
-	if (tegra_get_chip_id() == TEGRA124) {
-		if (id == TEGRA_POWERGATE_3D) {
-			tegra_pmc_writel(0, GPU_RG_CNTRL);
-			return 0;
-		}
-	}
-
-	/*
  	 * Tegra 2 has a bug where PCIE and VDE clamping masks are
  	 * swapped relatively to the partition ids
  	 */
@@ -253,6 +242,29 @@ int tegra_powergate_remove_clamping(int id)
  EXPORT_SYMBOL(tegra_powergate_remove_clamping);
/**
+ * tegra_powergate_gpu_set_clamping - control GPU-SOC clamps
+ *
+ * The post-Tegra114 chips have a separate rail gating register to configure
+ * clamps.
+ *
+ * @assert: true to assert clamp, and false to remove
+ */
+int tegra_powergate_gpu_set_clamping(bool assert)
Those functions with a bool parameter to set/unset something are really
annoying. Please avoid this pattern. The naming of the original function
is much more intuitive.
But the original function is not sufficient. Maybe add a tegra_powergate_assert_gpu_clamping()? That way I will prefer to adding one more removal function for GPU. And then again that's a bloat, too.

+{
+	if (!pmc->soc)
+		return -EINVAL;
+
+	if (tegra_get_chip_id() == TEGRA124) {
+		tegra_pmc_writel(assert ? 1 : 0, GPU_RG_CNTRL);
+		tegra_pmc_readl(GPU_RG_CNTRL);
You are reading the register back here, which to me seems like you are
trying to make sure that the write is flushed. Why is this needed?
I also observed the need to do this while working on Tegra124 PCIe in
Barebox, otherwise the partition wouldn't power up. I didn't have time
to follow up on this yet, so it would be nice if you could explain why
this is needed, or if you don't know ask HW about it.
That's a read fence to assure the post of the previous writes through Tegra interconnect. (copy-paster from https://android.googlesource.com/kernel/tegra.git/+/28b107dcb3aa122de8e94e48af548140d519298f)

+		return 0;
+	}
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL(tegra_powergate_gpu_set_clamping);
+
+/**
   * tegra_powergate_sequence_power_up() - power up partition
   * @id: partition ID
   * @clk: clock for partition
diff --git a/include/soc/tegra/pmc.h b/include/soc/tegra/pmc.h
index 65a93273e72f..53d620525a9e 100644
--- a/include/soc/tegra/pmc.h
+++ b/include/soc/tegra/pmc.h
@@ -109,6 +109,8 @@ int tegra_powergate_is_powered(int id);
  int tegra_powergate_power_on(int id);
  int tegra_powergate_power_off(int id);
  int tegra_powergate_remove_clamping(int id);
+/* Only for Tegra124 and later */
+int tegra_powergate_gpu_set_clamping(bool assert);
/* Must be called with clk disabled, and returns with clk enabled */
  int tegra_powergate_sequence_power_up(int id, struct clk *clk,


--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux