Hi Stephen, On 24 November 2014 at 10:08, Stephen Warren <swarren@xxxxxxxxxxxxx> wrote: > On 11/23/2014 08:40 AM, Simon Glass wrote: >> >> Add support for Tegra124 Nyan. Pinmux is based on norrin with a single >> change for the reset GPIO. > > > Allen, can you please confirm the reset GPIO setting for Norrin in the > pinmux patch you sent? It seems as if the two boards truly are this > identical, the reset pin would be too. > > Perhaps the issue is that one of these patches assumes > APB_MISC_PP_PINMUX_GLOBAL_0's CLAMP_INPUTS_WHEN_TRISTATED bit is set, > whereas the other assumes it is clear? The latest guidance is that that bit > should always be clear now, although not all pinmux spreadsheets have been > updated to conform with this. Can you both confirm the value your pinmux > settings expect, or were tested with? Well I tested with the values in my series, but I admit I don't know much about the mechanics. Will await Allen's knowledge on this. Regards, Simon -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
