Hello, in this v2 I have made the driver use devfreq. It works just as fine as the previous revision, but it's almost 200 lines more of code for not that much gain. Though I don't see much point in using devfreq, I think it's probably better than an ad-hoc driver because in the future I hope that devfreq will gain functionality that will be of use (PM_QOS_MEMORY_BANDWIDTH support, for example). These patches implement support for setting the rate of the EMC clock based on stats collected from the ACTMON, a piece of hw in the Tegra124 that counts memory accesses (among others). It depends on the following in-flight patches: * EMC driver: http://thread.gmane.org/gmane.linux.drivers.devicetree/99304 * CPUFreq driver: http://thread.gmane.org/gmane.linux.kernel/1812962 I have pushed a branch here for testing: http://cgit.collabora.com/git/user/tomeu/linux.git/log/?h=actmon-v2 Regards, Tomeu Tomeu Vizoso (3): of: Add binding for NVIDIA Tegra ACTMON node PM / devfreq: tegra: add devfreq driver for Tegra Activity Monitor ARM: tegra: Add Tegra124 ACTMON support .../devicetree/bindings/arm/tegra/actmon.txt | 38 ++ arch/arm/boot/dts/tegra124.dtsi | 23 + drivers/devfreq/Kconfig | 10 + drivers/devfreq/Makefile | 1 + drivers/devfreq/tegra-devfreq.c | 718 +++++++++++++++++++++ 5 files changed, 790 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/tegra/actmon.txt create mode 100644 drivers/devfreq/tegra-devfreq.c -- 1.9.3 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
