From: Mikko Perttunen <mperttunen@xxxxxxxxxx>
This adds critical trip points to the Jetson TK1 device tree.
The device will do a controlled shutdown when either the CPU, GPU
or MEM thermal zone reaches 101 degrees Celsius.
Signed-off-by: Mikko Perttunen <mperttunen@xxxxxxxxxx>
---
v6: added comments to cooling map nodes
arch/arm/boot/dts/tegra124-jetson-tk1.dts | 44 +++++++++++++++++++++++++++++++
1 file changed, 44 insertions(+)
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index 0cdb5cf..66a5eaf 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -1876,4 +1876,48 @@
<&tegra_car TEGRA124_CLK_EXTERN1>;
clock-names = "pll_a", "pll_a_out0", "mclk";
};
+
+ thermal-zones {
+ cpu {
+ trips {
+ trip@0 {
+ temperature = <101000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ /* There are currently no cooling maps because there are no cooling devices */
+ };
+ };
+
+ mem {
+ trips {
+ trip@0 {
+ temperature = <101000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ /* There are currently no cooling maps because there are no cooling devices */
+ };
+ };
+
+ gpu {
+ trips {
+ trip@0 {
+ temperature = <101000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ /* There are currently no cooling maps because there are no cooling devices */
+ };
+ };
+ };
};
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
