Hello Mikko,
On Thu, Aug 21, 2014 at 01:17:21PM +0300, Mikko Perttunen wrote:
> This adds critical trip points to the Jetson TK1 device tree.
> The device will do a controlled shutdown when either the CPU, GPU
> or MEM thermal zone reaches 101 degrees Celsius.
>
> Signed-off-by: Mikko Perttunen <mperttunen@xxxxxxxxxx>
> ---
> v5: added cooling-maps nodes
>
OK. But no cooling map entry in it. What was the reason again you don't
need/want to add the maps?
> arch/arm/boot/dts/tegra124-jetson-tk1.dts | 41 +++++++++++++++++++++++++++++++
> 1 file changed, 41 insertions(+)
>
> diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
> index 0cdb5cf..bcdab7f 100644
> --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
> +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
> @@ -1876,4 +1876,45 @@
> <&tegra_car TEGRA124_CLK_EXTERN1>;
> clock-names = "pll_a", "pll_a_out0", "mclk";
> };
> +
> + thermal-zones {
> + cpu {
> + trips {
> + trip@0 {
> + temperature = <101000>;
> + hysteresis = <0>;
> + type = "critical";
> + };
> + };
> +
> + cooling-maps {
> + };
> + };
> +
> + mem {
> + trips {
> + trip@0 {
> + temperature = <101000>;
> + hysteresis = <0>;
> + type = "critical";
> + };
> + };
> +
> + cooling-maps {
> + };
> + };
> +
> + gpu {
> + trips {
> + trip@0 {
> + temperature = <101000>;
> + hysteresis = <0>;
> + type = "critical";
> + };
> + };
> +
> + cooling-maps {
> + };
> + };
> + };
> };
> --
> 1.8.1.5
>
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
