Add S5P_CENTRAL_SEQ_OPTION register setup to cpuidle AFTR mode code
by moving the relevant code from exynos_pm_suspend() (used only by
suspend) to exynos_pm_central_suspend() (used by both suspend and
AFTR). Without this setup AFTR mode doesn't show any benefit over
WFI one (at least on Exynos4412 SoC). When this setup is applied
AFTR mode reduces power consumption by ~12% (as measured on Trats2
board).
This change is a preparation for adding secure firmware support to
EXYNOS cpuidle driver.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
Acked-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
---
v7:
- no changes
arch/arm/mach-exynos/pm.c | 11 ++++-------
1 file changed, 4 insertions(+), 7 deletions(-)
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index 6796fce..16c5c32 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -196,6 +196,10 @@ static void exynos_pm_central_suspend(void)
tmp = pmu_raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
+
+ /* Setting SEQ_OPTION register */
+ pmu_raw_writel(S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0,
+ S5P_CENTRAL_SEQ_OPTION);
}
static int exynos_pm_central_resume(void)
@@ -321,15 +325,8 @@ static void exynos_pm_prepare(void)
static int exynos_pm_suspend(void)
{
- unsigned long tmp;
-
exynos_pm_central_suspend();
- /* Setting SEQ_OPTION register */
-
- tmp = (S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0);
- pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION);
-
if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
exynos_cpu_save_register();
--
1.8.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
