On 09/09/2014 12:00 PM, Fabio Estevam wrote:
On Tue, Sep 9, 2014 at 12:28 PM, Marcel Ziswiler <marcel@xxxxxxxxxxxx> wrote:
This binding and driver describe/support playback to headphones, and
capture from line-in and microphone.
This driver is useful for the Toradex Apalis T30 and Colibri T30 modules.
Signed-off-by: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
---
.../bindings/sound/nvidia,tegra-audio-sgtl5000.txt | 45 +++++
sound/soc/tegra/Kconfig | 10 +
sound/soc/tegra/Makefile | 2 +
sound/soc/tegra/tegra_sgtl5000.c | 216 +++++++++++++++++++++
What about using the simple-audio-card binding instead of adding the
tegra_sgtl5000 machine driver?
An example of simple-audio-card used with sgtl5000 can be found here:
http://www.spinics.net/lists/devicetree/msg44466.html
I don't think that will work; the Tegra audio complex requires some
clock management that doesn't immediately seem to fit into the
simple-audio-card concept.
I had intended to refactor and collapse all the Tegra DT audio bindings
(and driver code) into a single instance so we didn't need to keep
adding more and more. However, I unfortunately never got around to that
and probably won't in the future either. Basically, the binding and code
would end up essentially identical to any of the current Tegra drivers
(or the union of them), with a few tweaks such as only creating e.g. a
headphone jack if a property in DT said to, and moving the sampling
frequency -> CODEC MCLK table out of the driver into a table in DT. I
think with those things parameterized in DT, we could get away with a
single "nvidia,tegra-audio-simple" binding and driver. Such a new
binding could be based on simple-audio-card with extensions though.
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
