Hi, this series adds support for hardware-triggered thermal reset to the PMC driver. Namely, it adds device tree properties for specifying the I2C command to be sent when thermtrip is triggered. It is to be noted that thermtrip won't be ever triggered without a soctherm driver to calibrate the sensors. Git repo at git://github.com/cyndis/linux.git pmc-thermtrip-v3 Mikko Perttunen (5): of: Add descriptions of thermtrip properties to Tegra PMC bindings of: Add nvidia,controller-id property to Tegra I2C bindings ARM: tegra124: Add I2C controller ids to device tree ARM: tegra: Add PMC thermtrip programming to Jetson TK1 device tree ARM: tegra: Add thermal reset (thermtrip) support to PMC .../bindings/arm/tegra/nvidia,tegra20-pmc.txt | 23 ++ .../devicetree/bindings/i2c/nvidia,tegra20-i2c.txt | 5 + arch/arm/boot/dts/tegra124-jetson-tk1.dts | 9 +- arch/arm/boot/dts/tegra124.dtsi | 6 + drivers/soc/tegra/pmc.c | 379 ++++++++++++++------- 5 files changed, 289 insertions(+), 133 deletions(-) -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
