[PATCH v2 5/6] PCI: tegra: Make sure the PCIe PLL is really reset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Eric Yuen <eyuen@xxxxxxxxxx>

Depending on the prior state of the controller, the PLL reset may not be
pulsed. Clear the register bit and set it after a small delay to ensure
that the PLL is really reset.

Signed-off-by: Eric Yuen <eyuen@xxxxxxxxxx>
Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
---
 drivers/pci/host/pci-tegra.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
index 8264bce77750..0ce43764dd36 100644
--- a/drivers/pci/host/pci-tegra.c
+++ b/drivers/pci/host/pci-tegra.c
@@ -849,6 +849,13 @@ static int tegra_pcie_enable_controller(struct tegra_pcie *pcie)
 	value |= PADS_PLL_CTL_REFCLK_INTERNAL_CML | soc->tx_ref_sel;
 	pads_writel(pcie, value, soc->pads_pll_ctl);
 
+	/* reset PLL */
+	value = pads_readl(pcie, soc->pads_pll_ctl);
+	value &= ~PADS_PLL_CTL_RST_B4SM;
+	pads_writel(pcie, value, soc->pads_pll_ctl);
+
+	usleep_range(20, 100);
+
 	/* take PLL out of reset  */
 	value = pads_readl(pcie, soc->pads_pll_ctl);
 	value |= PADS_PLL_CTL_RST_B4SM;
-- 
2.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux