.. and apparently the device tree patches are in staging/tegra.
On 25/08/14 13:55, Mikko Perttunen wrote:
On 25/08/14 13:32, Andreas Färber wrote:
Hi Stephen,
Am 22.08.2014 23:18, schrieb Stephen Warren:
From: Stephen Warren <swarren@xxxxxxxxxx>
This pinmux tables currently omit any configuration for PCIe clk_req,
wake, and rst pins, which in turn causes intermittent failures in
U-Boot's PCIe support. Import an updated version of the pinmux tables
which rectifies this.
(While I'm still hoping to remove the pinmux tables from DTs for
Tegra124+ devices, while they're still here, they may as well be
complete and correct).
Signed-off-by: Stephen Warren <swarren@xxxxxxxxxx>
---
arch/arm/boot/dts/tegra124-jetson-tk1.dts | 35
+++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
I've tested this patch on both -rc1 and yesterday's torvalds/linux.git
with tegra_defconfig: Both with or without this patch I get empty lspci
output.
There doesn't seem to be a tegra/linux.git for-next branch based on -rc1
yet - are patches from other subsystem trees needed to get the on-board
Ethernet detected or maybe some config option?
git://gitorious.org/thierryreding/linux.git staging/pci
Or did you test PCIe via the on-board slot?
I used U-Boot v2014.07, in case it matters.
Thanks,
Andreas
Cheers,
Mikko
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
