On Thu, Aug 14, 2014 at 07:47:42AM +0100, Hiroshi Doyu wrote:
> Thierry Reding <thierry.reding@xxxxxxxxx> writes:
>
> > +Multiple-master IOMMU:
> > +----------------------
> > +
> > + iommu {
> > + /* the specifier represents the ID of the master */
> > + #iommu-cells = <1>;
> > + };
> > +
> > + master@1 {
> > + /* device has master ID 42 in the IOMMU */
> > + iommus = <&{/iommu} 42>;
> > + };
> > +
> > + master@2 {
> > + /* device has master IDs 23 and 24 in the IOMMU */
> > + iommus = <&{/iommu} 23>, <&{/iommu} 24>;
> > + };
>
> I think that this "master ID" will be parsed in IOMMU driver. For
> example, ARM,SMMU expects "streamID" as "master ID", right?
>
> If a SoC has a feature to configure to assign streamID to devices at
> runtime, "streamID" is not equal to "master ID".
>
> iommus = <&{/smmu} "soc specific master ID">;
>
> "soc master ID" needs to be translated into "streamID" by SoC SW. It
> seems that ARM,SMMU kernel driver doesn't expect this kind of ID
> translation. If ARM,SMMU kernel driver is used as is, "soc master ID"
> would be incompatible? ARM,SMMU needs such translation before
> parsing. Is this my understanding right?
>
> If so I think that this master ID configuration/translation may be quite
> reasonable requirment for SoC using ARM,SMMU.
>
> Can we consider this ID translation within ARM,SMMU compatibility?
>
> IOW, is it possible to implement some SoC specific hook for ID
> translation/configuration in ARM,SMMU kernel driver?
I think there's some confusion here. The ARM architected SMMU does not
perform any StreamID translation -- it sees an incoming ID and uses that to
lookup a set of translation tables. However, for hotpluggable buses (e.g.
PCI), we need a way to communicate the StreamIDs for a newly discovered
device to the SMMU. I expect that this would be described as a translation
from another ID (e.g. requester id for PCI), so *that* is where the
translation occurs.
This translation can be described as a simple base + offset calculation,
e.g. StreamID = RequesterID + offset. Ideally, you'd have one offset per
host controller (and described in the host controller DT node), but you
could also imagine building tables where each RequesterID maps to a
different StreamID.
The final thing to mention is that some SoCs may have device hotplug
architectures that aren't like PCIe, so we may well need glue code there to
`allocate' StreamIDs from a fixed portion of the numberspace.
We don't need to solve all of these problems in one go, but the base +
offset code will certainly be useful; not just for the SMMU but also for
the GIC (where we have DeviceIDs). Mark Rutland is looking at this.
Will
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
