Hi, this series adds support for hardware-triggered thermal reset to the PMC driver. Namely, it adds device tree properties for specifying the I2C command to be sent when thermtrip is triggered. It is to be noted that thermtrip won't be ever triggered without a soctherm driver to calibrate the sensors, but I'll follow up with that patch. pmc.c required some juggling around to make the match data usable in probe, since I didn't want to put the code into the initcall either, since the soctherm driver won't be initialized by that point anyway. Series tested on Jetson-TK1. Should work on Tegra30 and Tegra114 too. Thanks, Mikko Mikko Perttunen (3): of: Add descriptions of thermtrip properties to Tegra PMC bindings ARM: tegra: Add PMC thermtrip programming to Jetson TK1 device tree ARM: tegra: Add thermal reset (thermtrip) support to PMC .../bindings/arm/tegra/nvidia,tegra20-pmc.txt | 13 + arch/arm/boot/dts/tegra124-jetson-tk1.dts | 5 + drivers/soc/tegra/pmc.c | 348 +++++++++++++-------- 3 files changed, 234 insertions(+), 132 deletions(-) -- 1.8.1.5 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
