This small series adds a flag that allows to specify that a DSI device supports non-continuous clock mode, and uses it in the Tegra DSI driver to only enable this mode on panels that support it. Until now, the Tegra DSI driver unconditionally enabled non-continuous mode, which prevented continous-mode-only panels from working with it. This allows us to enable the panel embedded in NVIDIA SHIELD and which only supports continuous mode. Changes since v2: - Changed the flag to enable non-continuous behavior instead of the contrary, to match the DSI spec more closely and highlight the fact continuous behavior is the default Changes since v1: - Removed unneeded regulator-always-on property for vdd_lcd regulator Alexandre Courbot (4): drm/dsi: Flag for non-continuous clock behavior drm/panel: Set non-continuous clock flag on supporting panels drm/tegra: dsi - Handle non-continuous clock flag ARM: tegra: roth: add display DT node arch/arm/boot/dts/tegra114-roth.dts | 22 +++++++++++++++++++--- drivers/gpu/drm/panel/panel-simple.c | 5 +++-- drivers/gpu/drm/tegra/dsi.c | 3 ++- include/drm/drm_mipi_dsi.h | 2 ++ 4 files changed, 26 insertions(+), 6 deletions(-) -- 2.0.0 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
