This adds the soctherm thermal sensing and management unit to the
Tegra124 device tree along with the four thermal zones it exports.
Signed-off-by: Mikko Perttunen <mperttunen@xxxxxxxxxx>
---
arch/arm/boot/dts/tegra124.dtsi | 48 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 48 insertions(+)
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index d675186..853627f 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -2,6 +2,7 @@
#include <dt-bindings/gpio/tegra-gpio.h>
#include <dt-bindings/pinctrl/pinctrl-tegra.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/tegra124-soctherm.h>
#include "skeleton.dtsi"
@@ -724,6 +725,53 @@
status = "disabled";
};
+ thermal-zones {
+ cpu {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors =
+ <&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
+ };
+
+ mem {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors =
+ <&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
+ };
+
+ gpu {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors =
+ <&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>;
+ };
+
+ pllx {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors =
+ <&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>;
+ };
+ };
+
+ soctherm: soctherm@0,700e2000 {
+ compatible = "nvidia,tegra124-soctherm";
+ reg = <0x0 0x700e2000 0x0 0x1000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA124_CLK_TSENSOR>,
+ <&tegra_car TEGRA124_CLK_SOC_THERM>;
+ clock-names = "tsensor", "soctherm";
+ resets = <&tegra_car 78>;
+ reset-names = "soctherm";
+
+ #thermal-sensor-cells = <1>;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
--
1.8.1.5
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
