For this v2 I have fixed the patches that are non-controversial (all Lucas' :)) and am resubmitting them in the hope that they will get merged. This will just leave the issue of Nouveau system-memory buffers mapping to be solved. This issue is quite complex, so let me summarize the situation and the data I have at hand. ARM caching is like a quantum world where Murphy's law constantly applies: sometimes things that you don't expect to work happen to work, but never the ones you would like to. On ARM the accepted wisdom is that all CPU mappings must share the same attributes, and that failure to do so results in undefined behavior. I have heard voices claiming that recent ARM SoCs were not affected by this, but have yet to see hard evidence that it is indeed the case. Most (or all) physical memory happens to be already mapped, cached, in the lowmem area of the virtual address space. This means that if we want to be safe wrt. the rule mentioned above, we must perform all subsequent memory mappings the same way. Nouveau currently performs its memory mappings cached, since it can rely on PCI to snoop and invalidate addresses written by the CPU - something that we don't have on ARM shared-memory systems. I had proposed a (bad) patch in the previous revision of this series that added a way to flush the CPU cache after each write (http://lists.freedesktop.org/archives/dri-devel/2014-May/059893.html ) but it did not trigger a lot of approval. Instead, it has been suggested to map such BOs write-combined. This would break the "one mapping type only" rule, but I gave it a try by changing the TTM_PL_TT manager's authorized caching to WC. This immediatly resulted in breakage of applications using the GPU. Digging a little further, I noticed that kernel mappings could be performed WC or uncached without any problem, but that user-space mappings *must* be cached under all circumstances. Failure to do so results in invalid pushbuffers being sent to the GPUs, messed up vertices, and other corruptions. Uncached mappings result in the same breakage. So, to summarize our options for GK20A: 1) Keeping mappings of TTM buffers cached seems to be the safest option, as it is consistent with the lowmem mapping likely affecting the memory of our buffers. But we will have to flush kernel CPU writes to these buffers one way or the other. 2) Changing the kernel mappings to WC or uncached seems to be safe. However user-space mappings must still be cached or inconsistencies happen. This double-policy for kernel and user-space mappings is not implemented in TTM and nothing so far suggests that it should be. And that's the state where we are. I am not considering the other possibilities (carving memory out of lowmem, etc.) as they have already been discussed many times by people much smarter than me (e.g. http://lists.linaro.org/pipermail/linaro-mm-sig/2011-April/000003.html ) and it seems that the issue is still here nonetheless. At this point suggestions towards option 1) or 2) (or where I could have screwed up in my understanding of ARM mappings) are welcome. And in the meantime, let's try to get the 3 guys below merged! Changes since v1: - Removed conditional compilation for Nouveau cache sync handler - Refactored nouveau_gem_ioctl_cpu_prep() into a new function to keep buffer cache management into nouveau_bo.c Lucas Stach (3): drm/ttm: recognize ARM arch in ioprot handler drm/ttm: introduce dma cache sync helpers drm/nouveau: hook up cache sync functions drivers/gpu/drm/nouveau/nouveau_bo.c | 47 +++++++++++++++++++++++++++++++++++ drivers/gpu/drm/nouveau/nouveau_bo.h | 1 + drivers/gpu/drm/nouveau/nouveau_gem.c | 10 +++----- drivers/gpu/drm/ttm/ttm_bo_util.c | 2 +- drivers/gpu/drm/ttm/ttm_tt.c | 25 +++++++++++++++++++ include/drm/ttm/ttm_bo_driver.h | 28 +++++++++++++++++++++ 6 files changed, 105 insertions(+), 8 deletions(-) -- 2.0.0 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
