Re: [RFC PATCH 1/4] memory: tegra124-emc: Add EMC driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jun 18, 2014 at 12:35:27AM +0200, Thierry Reding wrote:
> * PGP Signed by an unknown key
> 
> On Tue, Jun 17, 2014 at 02:16:06PM +0200, Tomeu Vizoso wrote:
> > On 06/16/2014 10:02 PM, Stephen Warren wrote:
> > >On 06/16/2014 07:35 AM, Tomeu Vizoso wrote:
> > >>+
> > >>+Child device nodes describe the memory settings for different configurations and
> > >>+clock rates.
> > >
> > >How do the child nodes do that? The binding needs to specify the format
> > >of the child node.
> > 
> > Sorry, that file was sent before I had finished removing the bits from
> > downstream that aren't needed yet. There's no current need for any child
> > nodes.
> > 
> > >This binding looks quite anaemic vs.
> > >Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-emc.txt; I
> > >would expect that this binding needs all the EMC register data from the
> > >tegra20-emc binding too. Can the two bindings be identical?
> > 
> > There's even less stuff needed right now, as all what ultimately the EMC
> > driver does is call clk_set_rate on the EMC clock. As the T124 EMC driver
> > gains more features, they should get more similar.
> > 
> > >Can you explain what the nvidia,mc and nvidia,pmc references are needed
> > >for? Hopefully, this driver isn't going to reach into those devices and
> > >touch their registers directly.
> > 
> > Not really needed, see above.
> 
> I've been working on a prototype driver for the memory controller. Part
> of what I've added is programming of the latency allowance registers (it
> doesn't yet expose an API to do so yet, though). I think that needs to
> eventually take into account the EMC frequency (and needs to be notified
> of changes to the same).
> 
> Without having thought this through very thoroughly, I suspect that
> rather than referencing the MC from the EMC it might be better to have
> the MC register with the EMC for notifications.
> 
> But perhaps there are other services from MC that EMC needs to work?
> 

If the emc frequency change is modelled as a clock, you could use CCF
notifications for this?

Cheers,

Peter.
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux