Currently the Tamonten DTS define a fixed regulator for the 5V supply.
However this regulator is in fact on the base board. Fix this by
properly defining the regulators found on the base boards.
Signed-off-by: Alban Bedel <alban.bedel@xxxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/tegra20-medcom-wide.dts | 46 +++++++++++++++++++++++++++++++
arch/arm/boot/dts/tegra20-plutux.dts | 46 +++++++++++++++++++++++++++++++
arch/arm/boot/dts/tegra20-tamonten.dtsi | 10 +------
arch/arm/boot/dts/tegra20-tec.dts | 46 +++++++++++++++++++++++++++++++
4 files changed, 139 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts
index 6d3a4cb..0cd05f7 100644
--- a/arch/arm/boot/dts/tegra20-medcom-wide.dts
+++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts
@@ -64,4 +64,50 @@
<&tegra_car TEGRA20_CLK_CDEV1>;
clock-names = "pll_a", "pll_a_out0", "mclk";
};
+
+ board_regulators {
+ compatible = "simple-bus";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vcc_24v_reg: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "vcc_24v";
+ regulator-min-microvolt = <24000000>;
+ regulator-max-microvolt = <24000000>;
+ regulator-always-on;
+ };
+
+ vdd_5v0_reg: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "vdd_5v0";
+ vin-supply = <&vcc_24v_reg>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ vdd_3v3_reg: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "vdd_3v3";
+ vin-supply = <&vcc_24v_reg>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_1v8_reg: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "vdd_1v8";
+ vin-supply = <&vdd_3v3_reg>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/tegra20-plutux.dts b/arch/arm/boot/dts/tegra20-plutux.dts
index 29051a2..a1b0e86 100644
--- a/arch/arm/boot/dts/tegra20-plutux.dts
+++ b/arch/arm/boot/dts/tegra20-plutux.dts
@@ -58,4 +58,50 @@
<&tegra_car TEGRA20_CLK_CDEV1>;
clock-names = "pll_a", "pll_a_out0", "mclk";
};
+
+ board_regulators {
+ compatible = "simple-bus";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vcc_24v_reg: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "vcc_24v";
+ regulator-min-microvolt = <24000000>;
+ regulator-max-microvolt = <24000000>;
+ regulator-always-on;
+ };
+
+ vdd_5v0_reg: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "vdd_5v0";
+ vin-supply = <&vcc_24v_reg>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ vdd_3v3_reg: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "vdd_3v3";
+ vin-supply = <&vcc_24v_reg>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_1v8_reg: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "vdd_1v8";
+ vin-supply = <&vdd_3v3_reg>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi
index a1b0d96..9c83185 100644
--- a/arch/arm/boot/dts/tegra20-tamonten.dtsi
+++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -334,6 +334,7 @@
#gpio-cells = <2>;
gpio-controller;
+ /* vdd_5v0_reg must be provided by the base board */
sys-supply = <&vdd_5v0_reg>;
vin-sm0-supply = <&sys_reg>;
vin-sm1-supply = <&sys_reg>;
@@ -511,15 +512,6 @@
#address-cells = <1>;
#size-cells = <0>;
- vdd_5v0_reg: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "vdd_5v0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
-
pci_vdd_reg: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/tegra20-tec.dts
index 890562c..173201a 100644
--- a/arch/arm/boot/dts/tegra20-tec.dts
+++ b/arch/arm/boot/dts/tegra20-tec.dts
@@ -67,4 +67,50 @@
<&tegra_car TEGRA20_CLK_CDEV1>;
clock-names = "pll_a", "pll_a_out0", "mclk";
};
+
+ board_regulators {
+ compatible = "simple-bus";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vcc_24v_reg: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "vcc_24v";
+ regulator-min-microvolt = <24000000>;
+ regulator-max-microvolt = <24000000>;
+ regulator-always-on;
+ };
+
+ vdd_5v0_reg: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "vdd_5v0";
+ vin-supply = <&vcc_24v_reg>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ vdd_3v3_reg: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "vdd_3v3";
+ vin-supply = <&vcc_24v_reg>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_1v8_reg: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "vdd_1v8";
+ vin-supply = <&vdd_3v3_reg>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ };
};
--
2.0.0
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
