On 06/01/2014 05:37 PM, Marcel Ziswiler wrote:
> This patch adds the device tree to support Toradex Apalis T30, a
> computer on module which can be used on different carrier boards.
>
> The module consists of a Tegra 3 SoC, two PMICs, 1 or 2 GB of DDR3L
> RAM, eMMC, an LM95245 temperature sensor chip, an i210 resp. i211
> gigabit Ethernet controller, an STMPE811 ADC/touch controller as well
> as two MCP2515 CAN controllers. Furthermore, there is an SGTL5000 audio
> codec which is not yet supported. Anything that is not self contained
> on the module is disabled by default.
>
> The device tree for the Evaluation Board includes the modules device
> tree and enables the supported peripherals of the carrier board (the
> Evaluation Board supports almost all of them).
>
> While at it also add the device tree binding documentation for Apalis
> T30 as well as the previously missing one for the recently added
> Colibri T30.
> diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts
> + /* SPI1: Apalis SPI1 */
> + spi@7000d400 {
> + status = "okay";
> + spi-max-frequency = <25000000>;
> + spidev0: spidev@1 {
> + compatible = "spidev";
> + reg = <1>;
> + spi-max-frequency = <25000000>;
> + };
> + };
I vaguely recall people speaking out against including "spidev" devices
in DT because they don't represent actual HW, but rather a way to
request that the SPI bus be exposed to user-space, which is a pure SW
issue. Wouldn't it be better if the spidev interface worked like
I2C_CHARDEV, where fake devices weren't actually required?
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
