On Tue, May 20, 2014 at 10:31:29PM +0200, Arnd Bergmann wrote: > On Tuesday 20 May 2014 16:00:02 Thierry Reding wrote: > > On Tue, May 20, 2014 at 03:34:46PM +0200, Arnd Bergmann wrote: > > > On Tuesday 20 May 2014 15:17:43 Thierry Reding wrote: > > > > On Tue, May 20, 2014 at 02:41:18PM +0200, Arnd Bergmann wrote: > > > > > On Tuesday 20 May 2014 14:02:43 Thierry Reding wrote: > > > > [...] > > > > > > Couldn't a single-master IOMMU be windowed? > > > > > > > > > > Ah, yes. That would actually be like an IBM pSeries, which has a windowed > > > > > IOMMU but uses one window per virtual machine. In that case, the window could > > > > > be a property of the iommu node though, rather than part of the address > > > > > in the link. > > > > > > > > Does that mean that the IOMMU has one statically configured window which > > > > is the same for each virtual machine? That would require some other > > > > mechanism to assign separate address spaces to each virtual machine, > > > > wouldn't it? But I suspect that if the IOMMU allows that it could be > > > > allocated dynamically at runtime. > > > > > > The way it works on pSeries is that upon VM creation, the guest is assigned > > > one 256MB window for use by assigned DMA capable devices. When the guest > > > creates a mapping, it uses a hypercall to associate a bus address in that > > > range with a guest physical address. The hypervisor checks that the bus > > > address is within the allowed range, and translates the guest physical > > > address into a host physical address, then enters both into the I/O page > > > table or I/O TLB. > > > > So when a VM is booted it is passed a device tree with that DMA window? > > Correct. > > > Given what you describe above this seems to be more of a configuration > > option to restrict the IOMMU to a subset of the physical memory for > > purposes of virtualization. So I agree that this wouldn't be a good fit > > for what we're trying to achieve with iommus or dma-ranges in this > > binding. > > Thinking about it again now, I wonder if there are any other use cases > for windowed IOMMUs. If this is the only one, there might be no use > in the #address-cells model I suggested instead of your original > #iommu-cells. So in this case virtualization is the reason why we need the DMA window. The reason for that is that the guest has no other way of knowing what other guests might be using, so it's essentially a mechanism for the host to manage the DMA region and allocate subregions for each guest. If virtualization isn't an issue then it seems to me that the need for DMA windows goes away because the operating system will track DMA regions anyway. The only reason I can think of why a windowed IOMMU would be useful is to prevent two or more devices from stepping on each others' toes. But that's a problem that the OS should already be handling during DMA buffer allocation, isn't it? > > > > > I would like to add an explanation about dma-ranges to the binding: > > > > > > > > > > 8<-------- > > > > > The parent bus of the iommu must have a valid "dma-ranges" property > > > > > describing how the physical address space of the IOMMU maps into > > > > > memory. > > > > > > > > With physical address space you mean the addresses after translation, > > > > not the I/O virtual addresses, right? But even so, how will this work > > > > when there are multiple IOMMU devices? What determines which IOMMU is > > > > mapped via which entry? > > > > > > > > Perhaps having multiple IOMMUs implies that there will have to be some > > > > partitioning of the parent address space to make sure two IOMMUs don't > > > > translate to the same ranges? > > > > > > These dma-ranges properties would almost always be for the entire RAM, > > > and we can treat anything else as a bug. > > > > Would it typically be a 1:1 mapping? In that case could we define an > > empty dma-ranges property to mean exactly that? That would make it > > consistent with the ranges property. > > Yes, I believe that is how it's already defined. I've gone through the proposal at [0] again, but couldn't find a mention of an empty "dma-ranges" property. But regardless I think that a 1:1 mapping is the obvious meaning of an empty "dma-ranges" property. [0]: http://www.openfirmware.org/ofwg/proposals/Closed/Accepted/410-it.txt One thing I'm not sure about is whether dma-ranges should be documented in this binding at all. Since there's an accepted standard proposal it would seem that it doesn't need to be specifically mentioned. One other option would be to link to the above proposal from the binding and then complement that with what an empty "dma-ranges" property means. Or we could possible document this in a file along with other standard properties. I don't think we currently do that for any properties, but my concern is that there will always be a limited number of people knowing about how such properties are supposed to work. If all of a sudden all these people would disappear, everybody else would be left with references to these properties but nowhere to look for their meaning. > > > > > A device with an "iommus" property will ignore the "dma-ranges" property > > > > > of the parent node and rely on the IOMMU for translation instead. > > > > > > > > Do we need to consider the case where an IOMMU listed in iommus isn't > > > > enabled (status = "disabled")? In that case presumably the device would > > > > either not function or may optionally continue to master onto the parent > > > > untranslated. > > > > > > My reasoning was that the DT should specify whether we use the IOMMU > > > or not. Being able to just switch on or off the IOMMU sounds nice as > > > well, so we could change the text above to do that. > > > > > > Another option would be to do this in the IOMMU code, basically > > > falling back to the IOMMU parent's dma-ranges property and using > > > linear dma_map_ops when that is disabled. > > > > Yes, it should be trivial for the IOMMU core code to take care of this > > special case. Still I think it's worth mentioning it in the binding so > > that it's clearly specified. > > Agreed. Okay, I have a new version of the binding that I think incorporates all the changes discussed so far. It uses #address-cells and #size-cells to define the length of the specifier, but if we decide against that it can easily be changed again. Thierry
Attachment:
pgp853gTvWwLh.pgp
Description: PGP signature
