Am Donnerstag, den 15.05.2014, 11:12 +0200 schrieb Thierry Reding: > On Thu, May 15, 2014 at 10:24:39AM +0200, Stefan Agner wrote: > > Hi Thierry, hi Philipp, > > > > Am 2014-05-15 09:51, schrieb Thierry Reding: > > > On Wed, May 14, 2014 at 11:45:57PM +0200, stefan@xxxxxxxx wrote: > > >> From: Stefan Agner <stefan@xxxxxxxx> > > >> > > >> This panels are sold by Toradex for Colibri T20/T30 and Apalis T30 > > >> evaluation kits. > > >> > > >> Signed-off-by: Stefan Agner <stefan@xxxxxxxx> > > > > > > Panel patches should go to the dri-devel mailing list as well. > > > > > > Also a patch was posted only yesterday for a panel that seems to be the > > > exact same one as this, even though the name differs minimally, see: > > > > > > https://patchwork.kernel.org/patch/4175251/ > > > > > > Adding Philipp on Cc so you guys can work together whether this is > > > indeed the same panel. The only differences seem to be in the vertical > > > front and back porches, but I suspect that either settings will work on > > > both Tegra and i.MX. > > > > Its etm0700g0dh6 vs. et070080dh6, Philipp's panel is with captive multi > > touch, (hence the M I guess). The panel itself really looks the same. > > > > I found this overview of EDT displays: > > http://www.dmbtechnics.com/scripts/passthru.php?id=7 > > > > There seem to be quite a lot variants with the same panel... > > > > Regarding timings, I just checked the documentation, Philipp's timing > > really matches the documented ones, I miscalculated the vertical back > > porch. > > Okay, so that means that the panel works for you with the same timings > that Philipp has in the ETM0700G0DH6 patch? If so then I definitely > think we should be sharing the timings in the driver by making the two > compatible entries point to the same driver data. > > > How do we resolve that? > > > > I would suggest that I split out that patch and remove the et070080dh6 > > panel and send the other as a single patch to the dri-devel mailing list > > as well. > > Yes, that would work. > > > Philipp, could you add my display type (et070080dh6) to the compatible > > list of your mode/panel entry? > > I also noticed that Philipp's patch doesn't actually introduce the > device tree bindings, so that will have to be added as well. Hmm, yes. Should I take over the edt,et070080dh6.txt from Stefan's series and repost all, or can I just hand in the missing edt,etm0700g0dh6.txt separately? regards Philipp -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
