From: Stefan Agner <stefan@xxxxxxxx> This patches cooked a while in our repository and is now quite complete. All is tested on several Colibri T30 modules and evaluation boards by Marcel and me. The device tree is splitted into a module part and the carrier board. The former is then included by the latter (in this case the evaluation board). The comments "Colibri: " represent the SO-DIMM Pin name as defined in the Colibri standard, and should be helpful for users adopting the device tree for other carrier boards. Stefan Agner (2): ARM: tegra: enable MCP251x CAN controller and DS1307 RTC ARM: tegra: initial add of Colibri T30 arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 202 ++++++++++++++ arch/arm/boot/dts/tegra30-colibri.dtsi | 375 ++++++++++++++++++++++++++ arch/arm/configs/tegra_defconfig | 6 + 4 files changed, 584 insertions(+) create mode 100644 arch/arm/boot/dts/tegra30-colibri-eval-v3.dts create mode 100644 arch/arm/boot/dts/tegra30-colibri.dtsi -- 1.9.2 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
