From: Bill Richardson <wfrichar@xxxxxxxxxxxx> This just updates include/linux/mfd/cros_ec_commands.h to match the latest EC version (which is the One True Source for such things). See <https://chromium.googlesource.com/chromiumos/platform/ec> [dianders: took today's ToT version from the Chromium OS EC; deleted references to cros_ec_dev and cros_ec_lpc since those aren't upstream yet] Signed-off-by: Bill Richardson <wfrichar@xxxxxxxxxxxx> Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx> Acked-by: Lee Jones <lee.jones@xxxxxxxxxx> Reviewed-by: Simon Glass <sjg@xxxxxxxxxxxx> Tested-by: Andrew Bresticker <abrestic@xxxxxxxxxxxx> Tested-by: Stephen Warren <swarren@xxxxxxxxxx> --- Changes in v3: None Changes in v2: None drivers/mfd/cros_ec.c | 2 +- include/linux/mfd/cros_ec.h | 4 +- include/linux/mfd/cros_ec_commands.h | 1128 +++++++++++++++++++++++++++++++--- 3 files changed, 1059 insertions(+), 75 deletions(-) diff --git a/drivers/mfd/cros_ec.c b/drivers/mfd/cros_ec.c index 783fe2e..c58ab96 100644 --- a/drivers/mfd/cros_ec.c +++ b/drivers/mfd/cros_ec.c @@ -30,7 +30,7 @@ int cros_ec_prepare_tx(struct cros_ec_device *ec_dev, uint8_t *out; int csum, i; - BUG_ON(msg->out_len > EC_HOST_PARAM_SIZE); + BUG_ON(msg->out_len > EC_PROTO2_MAX_PARAM_SIZE); out = ec_dev->dout; out[0] = EC_CMD_VERSION0 + msg->version; out[1] = msg->cmd; diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h index 032af7f..887ef4f 100644 --- a/include/linux/mfd/cros_ec.h +++ b/include/linux/mfd/cros_ec.h @@ -29,8 +29,8 @@ enum { EC_MSG_RX_PROTO_BYTES = 3, /* Max length of messages */ - EC_MSG_BYTES = EC_HOST_PARAM_SIZE + EC_MSG_TX_PROTO_BYTES, - + EC_MSG_BYTES = EC_PROTO2_MAX_PARAM_SIZE + + EC_MSG_TX_PROTO_BYTES, }; /** diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h index 86fd069..7853a64 100644 --- a/include/linux/mfd/cros_ec_commands.h +++ b/include/linux/mfd/cros_ec_commands.h @@ -24,25 +24,12 @@ #define __CROS_EC_COMMANDS_H /* - * Protocol overview + * Current version of this protocol * - * request: CMD [ P0 P1 P2 ... Pn S ] - * response: ERR [ P0 P1 P2 ... Pn S ] - * - * where the bytes are defined as follow : - * - CMD is the command code. (defined by EC_CMD_ constants) - * - ERR is the error code. (defined by EC_RES_ constants) - * - Px is the optional payload. - * it is not sent if the error code is not success. - * (defined by ec_params_ and ec_response_ structures) - * - S is the checksum which is the sum of all payload bytes. - * - * On LPC, CMD and ERR are sent/received at EC_LPC_ADDR_KERNEL|USER_CMD - * and the payloads are sent/received at EC_LPC_ADDR_KERNEL|USER_PARAM. - * On I2C, all bytes are sent serially in the same message. + * TODO(crosbug.com/p/11223): This is effectively useless; protocol is + * determined in other ways. Remove this once the kernel code no longer + * depends on it. */ - -/* Current version of this protocol */ #define EC_PROTO_VERSION 0x00000002 /* Command version mask */ @@ -57,13 +44,19 @@ #define EC_LPC_ADDR_HOST_CMD 0x204 /* I/O addresses for host command args and params */ -#define EC_LPC_ADDR_HOST_ARGS 0x800 -#define EC_LPC_ADDR_HOST_PARAM 0x804 -#define EC_HOST_PARAM_SIZE 0x0fc /* Size of param area in bytes */ - -/* I/O addresses for host command params, old interface */ -#define EC_LPC_ADDR_OLD_PARAM 0x880 -#define EC_OLD_PARAM_SIZE 0x080 /* Size of param area in bytes */ +/* Protocol version 2 */ +#define EC_LPC_ADDR_HOST_ARGS 0x800 /* And 0x801, 0x802, 0x803 */ +#define EC_LPC_ADDR_HOST_PARAM 0x804 /* For version 2 params; size is + * EC_PROTO2_MAX_PARAM_SIZE */ +/* Protocol version 3 */ +#define EC_LPC_ADDR_HOST_PACKET 0x800 /* Offset of version 3 packet */ +#define EC_LPC_HOST_PACKET_SIZE 0x100 /* Max size of version 3 packet */ + +/* The actual block is 0x800-0x8ff, but some BIOSes think it's 0x880-0x8ff + * and they tell the kernel that so we have to think of it as two parts. */ +#define EC_HOST_CMD_REGION0 0x800 +#define EC_HOST_CMD_REGION1 0x880 +#define EC_HOST_CMD_REGION_SIZE 0x80 /* EC command register bit functions */ #define EC_LPC_CMDR_DATA (1 << 0) /* Data ready for host to read */ @@ -79,18 +72,22 @@ #define EC_MEMMAP_TEXT_MAX 8 /* Size of a string in the memory map */ /* The offset address of each type of data in mapped memory. */ -#define EC_MEMMAP_TEMP_SENSOR 0x00 /* Temp sensors */ -#define EC_MEMMAP_FAN 0x10 /* Fan speeds */ -#define EC_MEMMAP_TEMP_SENSOR_B 0x18 /* Temp sensors (second set) */ -#define EC_MEMMAP_ID 0x20 /* 'E' 'C' */ +#define EC_MEMMAP_TEMP_SENSOR 0x00 /* Temp sensors 0x00 - 0x0f */ +#define EC_MEMMAP_FAN 0x10 /* Fan speeds 0x10 - 0x17 */ +#define EC_MEMMAP_TEMP_SENSOR_B 0x18 /* More temp sensors 0x18 - 0x1f */ +#define EC_MEMMAP_ID 0x20 /* 0x20 == 'E', 0x21 == 'C' */ #define EC_MEMMAP_ID_VERSION 0x22 /* Version of data in 0x20 - 0x2f */ #define EC_MEMMAP_THERMAL_VERSION 0x23 /* Version of data in 0x00 - 0x1f */ #define EC_MEMMAP_BATTERY_VERSION 0x24 /* Version of data in 0x40 - 0x7f */ #define EC_MEMMAP_SWITCHES_VERSION 0x25 /* Version of data in 0x30 - 0x33 */ #define EC_MEMMAP_EVENTS_VERSION 0x26 /* Version of data in 0x34 - 0x3f */ -#define EC_MEMMAP_HOST_CMD_FLAGS 0x27 /* Host command interface flags */ -#define EC_MEMMAP_SWITCHES 0x30 -#define EC_MEMMAP_HOST_EVENTS 0x34 +#define EC_MEMMAP_HOST_CMD_FLAGS 0x27 /* Host cmd interface flags (8 bits) */ +/* Unused 0x28 - 0x2f */ +#define EC_MEMMAP_SWITCHES 0x30 /* 8 bits */ +/* Unused 0x31 - 0x33 */ +#define EC_MEMMAP_HOST_EVENTS 0x34 /* 32 bits */ +/* Reserve 0x38 - 0x3f for additional host event-related stuff */ +/* Battery values are all 32 bits */ #define EC_MEMMAP_BATT_VOLT 0x40 /* Battery Present Voltage */ #define EC_MEMMAP_BATT_RATE 0x44 /* Battery Present Rate */ #define EC_MEMMAP_BATT_CAP 0x48 /* Battery Remaining Capacity */ @@ -99,10 +96,24 @@ #define EC_MEMMAP_BATT_DVLT 0x54 /* Battery Design Voltage */ #define EC_MEMMAP_BATT_LFCC 0x58 /* Battery Last Full Charge Capacity */ #define EC_MEMMAP_BATT_CCNT 0x5c /* Battery Cycle Count */ +/* Strings are all 8 bytes (EC_MEMMAP_TEXT_MAX) */ #define EC_MEMMAP_BATT_MFGR 0x60 /* Battery Manufacturer String */ #define EC_MEMMAP_BATT_MODEL 0x68 /* Battery Model Number String */ #define EC_MEMMAP_BATT_SERIAL 0x70 /* Battery Serial Number String */ #define EC_MEMMAP_BATT_TYPE 0x78 /* Battery Type String */ +#define EC_MEMMAP_ALS 0x80 /* ALS readings in lux (2 X 16 bits) */ +/* Unused 0x84 - 0x8f */ +#define EC_MEMMAP_ACC_STATUS 0x90 /* Accelerometer status (8 bits )*/ +/* Unused 0x91 */ +#define EC_MEMMAP_ACC_DATA 0x92 /* Accelerometer data 0x92 - 0x9f */ +#define EC_MEMMAP_GYRO_DATA 0xa0 /* Gyroscope data 0xa0 - 0xa5 */ +/* Unused 0xa6 - 0xfe (remember, 0xff is NOT part of the memmap region) */ + + +/* Define the format of the accelerometer mapped memory status byte. */ +#define EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK 0x0f +#define EC_MEMMAP_ACC_STATUS_BUSY_BIT (1 << 4) +#define EC_MEMMAP_ACC_STATUS_PRESENCE_BIT (1 << 7) /* Number of temp sensors at EC_MEMMAP_TEMP_SENSOR */ #define EC_TEMP_SENSOR_ENTRIES 16 @@ -112,6 +123,8 @@ * Valid only if EC_MEMMAP_THERMAL_VERSION returns >= 2. */ #define EC_TEMP_SENSOR_B_ENTRIES 8 + +/* Special values for mapped temperature sensors */ #define EC_TEMP_SENSOR_NOT_PRESENT 0xff #define EC_TEMP_SENSOR_ERROR 0xfe #define EC_TEMP_SENSOR_NOT_POWERED 0xfd @@ -122,6 +135,18 @@ */ #define EC_TEMP_SENSOR_OFFSET 200 +/* + * Number of ALS readings at EC_MEMMAP_ALS + */ +#define EC_ALS_ENTRIES 2 + +/* + * The default value a temperature sensor will return when it is present but + * has not been read this boot. This is a reasonable number to avoid + * triggering alarms on the host. + */ +#define EC_TEMP_SENSOR_DEFAULT (296 - EC_TEMP_SENSOR_OFFSET) + #define EC_FAN_SPEED_ENTRIES 4 /* Number of fans at EC_MEMMAP_FAN */ #define EC_FAN_SPEED_NOT_PRESENT 0xffff /* Entry not present */ #define EC_FAN_SPEED_STALLED 0xfffe /* Fan stalled */ @@ -137,8 +162,8 @@ #define EC_SWITCH_LID_OPEN 0x01 #define EC_SWITCH_POWER_BUTTON_PRESSED 0x02 #define EC_SWITCH_WRITE_PROTECT_DISABLED 0x04 -/* Recovery requested via keyboard */ -#define EC_SWITCH_KEYBOARD_RECOVERY 0x08 +/* Was recovery requested via keyboard; now unused. */ +#define EC_SWITCH_IGNORE1 0x08 /* Recovery requested via dedicated signal (from servo board) */ #define EC_SWITCH_DEDICATED_RECOVERY 0x10 /* Was fake developer mode switch; now unused. Remove in next refactor. */ @@ -147,10 +172,15 @@ /* Host command interface flags */ /* Host command interface supports LPC args (LPC interface only) */ #define EC_HOST_CMD_FLAG_LPC_ARGS_SUPPORTED 0x01 +/* Host command interface supports version 3 protocol */ +#define EC_HOST_CMD_FLAG_VERSION_3 0x02 /* Wireless switch flags */ -#define EC_WIRELESS_SWITCH_WLAN 0x01 -#define EC_WIRELESS_SWITCH_BLUETOOTH 0x02 +#define EC_WIRELESS_SWITCH_ALL ~0x00 /* All flags */ +#define EC_WIRELESS_SWITCH_WLAN 0x01 /* WLAN radio */ +#define EC_WIRELESS_SWITCH_BLUETOOTH 0x02 /* Bluetooth radio */ +#define EC_WIRELESS_SWITCH_WWAN 0x04 /* WWAN power */ +#define EC_WIRELESS_SWITCH_WLAN_POWER 0x08 /* WLAN power */ /* * This header file is used in coreboot both in C and ACPI code. The ACPI code @@ -159,6 +189,14 @@ */ #ifndef __ACPI__ +/* + * Define __packed if someone hasn't beat us to it. Linux kernel style + * checking prefers __packed over __attribute__((packed)). + */ +#ifndef __packed +#define __packed __attribute__((packed)) +#endif + /* LPC command status byte masks */ /* EC has written a byte in the data register and host hasn't read it yet */ #define EC_LPC_STATUS_TO_HOST 0x01 @@ -198,6 +236,9 @@ enum ec_status { EC_RES_UNAVAILABLE = 9, /* No response available */ EC_RES_TIMEOUT = 10, /* We got a timeout */ EC_RES_OVERFLOW = 11, /* Table / data overflow */ + EC_RES_INVALID_HEADER = 12, /* Header contains invalid data */ + EC_RES_REQUEST_TRUNCATED = 13, /* Didn't get the entire request */ + EC_RES_RESPONSE_TOO_BIG = 14 /* Response was too big to handle */ }; /* @@ -235,6 +276,16 @@ enum host_event_code { /* Shutdown due to battery level too low */ EC_HOST_EVENT_BATTERY_SHUTDOWN = 17, + /* Suggest that the AP throttle itself */ + EC_HOST_EVENT_THROTTLE_START = 18, + /* Suggest that the AP resume normal speed */ + EC_HOST_EVENT_THROTTLE_STOP = 19, + + /* Hang detect logic detected a hang and host event timeout expired */ + EC_HOST_EVENT_HANG_DETECT = 20, + /* Hang detect logic detected a hang and warm rebooted the AP */ + EC_HOST_EVENT_HANG_REBOOT = 21, + /* * The high bit of the event mask is not used as a host event code. If * it reads back as set, then the entire event mask should be @@ -279,6 +330,188 @@ struct ec_lpc_host_args { */ #define EC_HOST_ARGS_FLAG_TO_HOST 0x02 +/*****************************************************************************/ +/* + * Byte codes returned by EC over SPI interface. + * + * These can be used by the AP to debug the EC interface, and to determine + * when the EC is not in a state where it will ever get around to responding + * to the AP. + * + * Example of sequence of bytes read from EC for a current good transfer: + * 1. - - AP asserts chip select (CS#) + * 2. EC_SPI_OLD_READY - AP sends first byte(s) of request + * 3. - - EC starts handling CS# interrupt + * 4. EC_SPI_RECEIVING - AP sends remaining byte(s) of request + * 5. EC_SPI_PROCESSING - EC starts processing request; AP is clocking in + * bytes looking for EC_SPI_FRAME_START + * 6. - - EC finishes processing and sets up response + * 7. EC_SPI_FRAME_START - AP reads frame byte + * 8. (response packet) - AP reads response packet + * 9. EC_SPI_PAST_END - Any additional bytes read by AP + * 10 - - AP deasserts chip select + * 11 - - EC processes CS# interrupt and sets up DMA for + * next request + * + * If the AP is waiting for EC_SPI_FRAME_START and sees any value other than + * the following byte values: + * EC_SPI_OLD_READY + * EC_SPI_RX_READY + * EC_SPI_RECEIVING + * EC_SPI_PROCESSING + * + * Then the EC found an error in the request, or was not ready for the request + * and lost data. The AP should give up waiting for EC_SPI_FRAME_START, + * because the EC is unable to tell when the AP is done sending its request. + */ + +/* + * Framing byte which precedes a response packet from the EC. After sending a + * request, the AP will clock in bytes until it sees the framing byte, then + * clock in the response packet. + */ +#define EC_SPI_FRAME_START 0xec + +/* + * Padding bytes which are clocked out after the end of a response packet. + */ +#define EC_SPI_PAST_END 0xed + +/* + * EC is ready to receive, and has ignored the byte sent by the AP. EC expects + * that the AP will send a valid packet header (starting with + * EC_COMMAND_PROTOCOL_3) in the next 32 bytes. + */ +#define EC_SPI_RX_READY 0xf8 + +/* + * EC has started receiving the request from the AP, but hasn't started + * processing it yet. + */ +#define EC_SPI_RECEIVING 0xf9 + +/* EC has received the entire request from the AP and is processing it. */ +#define EC_SPI_PROCESSING 0xfa + +/* + * EC received bad data from the AP, such as a packet header with an invalid + * length. EC will ignore all data until chip select deasserts. + */ +#define EC_SPI_RX_BAD_DATA 0xfb + +/* + * EC received data from the AP before it was ready. That is, the AP asserted + * chip select and started clocking data before the EC was ready to receive it. + * EC will ignore all data until chip select deasserts. + */ +#define EC_SPI_NOT_READY 0xfc + +/* + * EC was ready to receive a request from the AP. EC has treated the byte sent + * by the AP as part of a request packet, or (for old-style ECs) is processing + * a fully received packet but is not ready to respond yet. + */ +#define EC_SPI_OLD_READY 0xfd + +/*****************************************************************************/ + +/* + * Protocol version 2 for I2C and SPI send a request this way: + * + * 0 EC_CMD_VERSION0 + (command version) + * 1 Command number + * 2 Length of params = N + * 3..N+2 Params, if any + * N+3 8-bit checksum of bytes 0..N+2 + * + * The corresponding response is: + * + * 0 Result code (EC_RES_*) + * 1 Length of params = M + * 2..M+1 Params, if any + * M+2 8-bit checksum of bytes 0..M+1 + */ +#define EC_PROTO2_REQUEST_HEADER_BYTES 3 +#define EC_PROTO2_REQUEST_TRAILER_BYTES 1 +#define EC_PROTO2_REQUEST_OVERHEAD (EC_PROTO2_REQUEST_HEADER_BYTES + \ + EC_PROTO2_REQUEST_TRAILER_BYTES) + +#define EC_PROTO2_RESPONSE_HEADER_BYTES 2 +#define EC_PROTO2_RESPONSE_TRAILER_BYTES 1 +#define EC_PROTO2_RESPONSE_OVERHEAD (EC_PROTO2_RESPONSE_HEADER_BYTES + \ + EC_PROTO2_RESPONSE_TRAILER_BYTES) + +/* Parameter length was limited by the LPC interface */ +#define EC_PROTO2_MAX_PARAM_SIZE 0xfc + +/* Maximum request and response packet sizes for protocol version 2 */ +#define EC_PROTO2_MAX_REQUEST_SIZE (EC_PROTO2_REQUEST_OVERHEAD + \ + EC_PROTO2_MAX_PARAM_SIZE) +#define EC_PROTO2_MAX_RESPONSE_SIZE (EC_PROTO2_RESPONSE_OVERHEAD + \ + EC_PROTO2_MAX_PARAM_SIZE) + +/*****************************************************************************/ + +/* + * Value written to legacy command port / prefix byte to indicate protocol + * 3+ structs are being used. Usage is bus-dependent. + */ +#define EC_COMMAND_PROTOCOL_3 0xda + +#define EC_HOST_REQUEST_VERSION 3 + +/* Version 3 request from host */ +struct ec_host_request { + /* Struct version (=3) + * + * EC will return EC_RES_INVALID_HEADER if it receives a header with a + * version it doesn't know how to parse. + */ + uint8_t struct_version; + + /* + * Checksum of request and data; sum of all bytes including checksum + * should total to 0. + */ + uint8_t checksum; + + /* Command code */ + uint16_t command; + + /* Command version */ + uint8_t command_version; + + /* Unused byte in current protocol version; set to 0 */ + uint8_t reserved; + + /* Length of data which follows this header */ + uint16_t data_len; +} __packed; + +#define EC_HOST_RESPONSE_VERSION 3 + +/* Version 3 response from EC */ +struct ec_host_response { + /* Struct version (=3) */ + uint8_t struct_version; + + /* + * Checksum of response and data; sum of all bytes including checksum + * should total to 0. + */ + uint8_t checksum; + + /* Result code (EC_RES_*) */ + uint16_t result; + + /* Length of data which follows this header */ + uint16_t data_len; + + /* Unused bytes in current protocol version; set to 0 */ + uint16_t reserved; +} __packed; + +/*****************************************************************************/ /* * Notes on commands: * @@ -418,6 +651,68 @@ struct ec_response_get_comms_status { uint32_t flags; /* Mask of enum ec_comms_status */ } __packed; +/* Fake a variety of responses, purely for testing purposes. */ +#define EC_CMD_TEST_PROTOCOL 0x0a + +/* Tell the EC what to send back to us. */ +struct ec_params_test_protocol { + uint32_t ec_result; + uint32_t ret_len; + uint8_t buf[32]; +} __packed; + +/* Here it comes... */ +struct ec_response_test_protocol { + uint8_t buf[32]; +} __packed; + +/* Get prococol information */ +#define EC_CMD_GET_PROTOCOL_INFO 0x0b + +/* Flags for ec_response_get_protocol_info.flags */ +/* EC_RES_IN_PROGRESS may be returned if a command is slow */ +#define EC_PROTOCOL_INFO_IN_PROGRESS_SUPPORTED (1 << 0) + +struct ec_response_get_protocol_info { + /* Fields which exist if at least protocol version 3 supported */ + + /* Bitmask of protocol versions supported (1 << n means version n)*/ + uint32_t protocol_versions; + + /* Maximum request packet size, in bytes */ + uint16_t max_request_packet_size; + + /* Maximum response packet size, in bytes */ + uint16_t max_response_packet_size; + + /* Flags; see EC_PROTOCOL_INFO_* */ + uint32_t flags; +} __packed; + + +/*****************************************************************************/ +/* Get/Set miscellaneous values */ + +/* The upper byte of .flags tells what to do (nothing means "get") */ +#define EC_GSV_SET 0x80000000 + +/* The lower three bytes of .flags identifies the parameter, if that has + meaning for an individual command. */ +#define EC_GSV_PARAM_MASK 0x00ffffff + +struct ec_params_get_set_value { + uint32_t flags; + uint32_t value; +} __packed; + +struct ec_response_get_set_value { + uint32_t flags; + uint32_t value; +} __packed; + +/* More than one command can use these structs to get/set paramters. */ +#define EC_CMD_GSV_PAUSE_IN_S5 0x0c + /*****************************************************************************/ /* Flash commands */ @@ -425,6 +720,7 @@ struct ec_response_get_comms_status { /* Get flash info */ #define EC_CMD_FLASH_INFO 0x10 +/* Version 0 returns these fields */ struct ec_response_flash_info { /* Usable flash size, in bytes */ uint32_t flash_size; @@ -445,6 +741,37 @@ struct ec_response_flash_info { uint32_t protect_block_size; } __packed; +/* Flags for version 1+ flash info command */ +/* EC flash erases bits to 0 instead of 1 */ +#define EC_FLASH_INFO_ERASE_TO_0 (1 << 0) + +/* + * Version 1 returns the same initial fields as version 0, with additional + * fields following. + * + * gcc anonymous structs don't seem to get along with the __packed directive; + * if they did we'd define the version 0 struct as a sub-struct of this one. + */ +struct ec_response_flash_info_1 { + /* Version 0 fields; see above for description */ + uint32_t flash_size; + uint32_t write_block_size; + uint32_t erase_block_size; + uint32_t protect_block_size; + + /* Version 1 adds these fields: */ + /* + * Ideal write size in bytes. Writes will be fastest if size is + * exactly this and offset is a multiple of this. For example, an EC + * may have a write buffer which can do half-page operations if data is + * aligned, and a slower word-at-a-time write mode. + */ + uint32_t write_ideal_size; + + /* Flags; see EC_FLASH_INFO_* */ + uint32_t flags; +} __packed; + /* * Read flash * @@ -459,15 +786,15 @@ struct ec_params_flash_read { /* Write flash */ #define EC_CMD_FLASH_WRITE 0x12 +#define EC_VER_FLASH_WRITE 1 + +/* Version 0 of the flash command supported only 64 bytes of data */ +#define EC_FLASH_WRITE_VER0_SIZE 64 struct ec_params_flash_write { uint32_t offset; /* Byte offset to write */ uint32_t size; /* Size to write in bytes */ - /* - * Data to write. Could really use EC_PARAM_SIZE - 8, but tidiest to - * use a power of 2 so writes stay aligned. - */ - uint8_t data[64]; + /* Followed by data to write */ } __packed; /* Erase flash */ @@ -543,7 +870,7 @@ struct ec_response_flash_protect { enum ec_flash_region { /* Region which holds read-only EC image */ - EC_FLASH_REGION_RO, + EC_FLASH_REGION_RO = 0, /* Region which holds rewritable EC image */ EC_FLASH_REGION_RW, /* @@ -551,6 +878,8 @@ enum ec_flash_region { * EC_FLASH_REGION_RO) */ EC_FLASH_REGION_WP_RO, + /* Number of regions */ + EC_FLASH_REGION_COUNT, }; struct ec_params_flash_region_info { @@ -639,15 +968,15 @@ struct rgb_s { */ struct lightbar_params { /* Timing */ - int google_ramp_up; - int google_ramp_down; - int s3s0_ramp_up; - int s0_tick_delay[2]; /* AC=0/1 */ - int s0a_tick_delay[2]; /* AC=0/1 */ - int s0s3_ramp_down; - int s3_sleep_for; - int s3_ramp_up; - int s3_ramp_down; + int32_t google_ramp_up; + int32_t google_ramp_down; + int32_t s3s0_ramp_up; + int32_t s0_tick_delay[2]; /* AC=0/1 */ + int32_t s0a_tick_delay[2]; /* AC=0/1 */ + int32_t s0s3_ramp_down; + int32_t s3_sleep_for; + int32_t s3_ramp_up; + int32_t s3_ramp_down; /* Oscillation */ uint8_t new_s0; @@ -676,7 +1005,7 @@ struct ec_params_lightbar { union { struct { /* no args */ - } dump, off, on, init, get_seq, get_params; + } dump, off, on, init, get_seq, get_params, version; struct num { uint8_t num; @@ -710,6 +1039,11 @@ struct ec_response_lightbar { struct lightbar_params get_params; + struct version { + uint32_t num; + uint32_t flags; + } version; + struct { /* no return params */ } off, on, init, brightness, seq, reg, rgb, demo, set_params; @@ -730,10 +1064,62 @@ enum lightbar_command { LIGHTBAR_CMD_DEMO = 9, LIGHTBAR_CMD_GET_PARAMS = 10, LIGHTBAR_CMD_SET_PARAMS = 11, + LIGHTBAR_CMD_VERSION = 12, LIGHTBAR_NUM_CMDS }; /*****************************************************************************/ +/* LED control commands */ + +#define EC_CMD_LED_CONTROL 0x29 + +enum ec_led_id { + /* LED to indicate battery state of charge */ + EC_LED_ID_BATTERY_LED = 0, + /* + * LED to indicate system power state (on or in suspend). + * May be on power button or on C-panel. + */ + EC_LED_ID_POWER_LED, + /* LED on power adapter or its plug */ + EC_LED_ID_ADAPTER_LED, + + EC_LED_ID_COUNT +}; + +/* LED control flags */ +#define EC_LED_FLAGS_QUERY (1 << 0) /* Query LED capability only */ +#define EC_LED_FLAGS_AUTO (1 << 1) /* Switch LED back to automatic control */ + +enum ec_led_colors { + EC_LED_COLOR_RED = 0, + EC_LED_COLOR_GREEN, + EC_LED_COLOR_BLUE, + EC_LED_COLOR_YELLOW, + EC_LED_COLOR_WHITE, + + EC_LED_COLOR_COUNT +}; + +struct ec_params_led_control { + uint8_t led_id; /* Which LED to control */ + uint8_t flags; /* Control flags */ + + uint8_t brightness[EC_LED_COLOR_COUNT]; +} __packed; + +struct ec_response_led_control { + /* + * Available brightness value range. + * + * Range 0 means color channel not present. + * Range 1 means on/off control. + * Other values means the LED is control by PWM. + */ + uint8_t brightness_range[EC_LED_COLOR_COUNT]; +} __packed; + +/*****************************************************************************/ /* Verified boot commands */ /* @@ -790,6 +1176,181 @@ enum ec_vboot_hash_status { #define EC_VBOOT_HASH_OFFSET_RW 0xfffffffd /*****************************************************************************/ +/* + * Motion sense commands. We'll make separate structs for sub-commands with + * different input args, so that we know how much to expect. + */ +#define EC_CMD_MOTION_SENSE_CMD 0x2B + +/* Motion sense commands */ +enum motionsense_command { + /* + * Dump command returns all motion sensor data including motion sense + * module flags and individual sensor flags. + */ + MOTIONSENSE_CMD_DUMP = 0, + + /* + * Info command returns data describing the details of a given sensor, + * including enum motionsensor_type, enum motionsensor_location, and + * enum motionsensor_chip. + */ + MOTIONSENSE_CMD_INFO = 1, + + /* + * EC Rate command is a setter/getter command for the EC sampling rate + * of all motion sensors in milliseconds. + */ + MOTIONSENSE_CMD_EC_RATE = 2, + + /* + * Sensor ODR command is a setter/getter command for the output data + * rate of a specific motion sensor in millihertz. + */ + MOTIONSENSE_CMD_SENSOR_ODR = 3, + + /* + * Sensor range command is a setter/getter command for the range of + * a specified motion sensor in +/-G's or +/- deg/s. + */ + MOTIONSENSE_CMD_SENSOR_RANGE = 4, + + /* + * Setter/getter command for the keyboard wake angle. When the lid + * angle is greater than this value, keyboard wake is disabled in S3, + * and when the lid angle goes less than this value, keyboard wake is + * enabled. Note, the lid angle measurement is an approximate, + * un-calibrated value, hence the wake angle isn't exact. + */ + MOTIONSENSE_CMD_KB_WAKE_ANGLE = 5, + + /* Number of motionsense sub-commands. */ + MOTIONSENSE_NUM_CMDS +}; + +enum motionsensor_id { + EC_MOTION_SENSOR_ACCEL_BASE = 0, + EC_MOTION_SENSOR_ACCEL_LID = 1, + EC_MOTION_SENSOR_GYRO = 2, + + /* + * Note, if more sensors are added and this count changes, the padding + * in ec_response_motion_sense dump command must be modified. + */ + EC_MOTION_SENSOR_COUNT = 3 +}; + +/* List of motion sensor types. */ +enum motionsensor_type { + MOTIONSENSE_TYPE_ACCEL = 0, + MOTIONSENSE_TYPE_GYRO = 1, +}; + +/* List of motion sensor locations. */ +enum motionsensor_location { + MOTIONSENSE_LOC_BASE = 0, + MOTIONSENSE_LOC_LID = 1, +}; + +/* List of motion sensor chips. */ +enum motionsensor_chip { + MOTIONSENSE_CHIP_KXCJ9 = 0, +}; + +/* Module flag masks used for the dump sub-command. */ +#define MOTIONSENSE_MODULE_FLAG_ACTIVE (1<<0) + +/* Sensor flag masks used for the dump sub-command. */ +#define MOTIONSENSE_SENSOR_FLAG_PRESENT (1<<0) + +/* + * Send this value for the data element to only perform a read. If you + * send any other value, the EC will interpret it as data to set and will + * return the actual value set. + */ +#define EC_MOTION_SENSE_NO_VALUE -1 + +struct ec_params_motion_sense { + uint8_t cmd; + union { + /* Used for MOTIONSENSE_CMD_DUMP. */ + struct { + /* no args */ + } dump; + + /* + * Used for MOTIONSENSE_CMD_EC_RATE and + * MOTIONSENSE_CMD_KB_WAKE_ANGLE. + */ + struct { + /* Data to set or EC_MOTION_SENSE_NO_VALUE to read. */ + int16_t data; + } ec_rate, kb_wake_angle; + + /* Used for MOTIONSENSE_CMD_INFO. */ + struct { + /* Should be element of enum motionsensor_id. */ + uint8_t sensor_num; + } info; + + /* + * Used for MOTIONSENSE_CMD_SENSOR_ODR and + * MOTIONSENSE_CMD_SENSOR_RANGE. + */ + struct { + /* Should be element of enum motionsensor_id. */ + uint8_t sensor_num; + + /* Rounding flag, true for round-up, false for down. */ + uint8_t roundup; + + uint16_t reserved; + + /* Data to set or EC_MOTION_SENSE_NO_VALUE to read. */ + int32_t data; + } sensor_odr, sensor_range; + }; +} __packed; + +struct ec_response_motion_sense { + union { + /* Used for MOTIONSENSE_CMD_DUMP. */ + struct { + /* Flags representing the motion sensor module. */ + uint8_t module_flags; + + /* Flags for each sensor in enum motionsensor_id. */ + uint8_t sensor_flags[EC_MOTION_SENSOR_COUNT]; + + /* Array of all sensor data. Each sensor is 3-axis. */ + int16_t data[3*EC_MOTION_SENSOR_COUNT]; + } dump; + + /* Used for MOTIONSENSE_CMD_INFO. */ + struct { + /* Should be element of enum motionsensor_type. */ + uint8_t type; + + /* Should be element of enum motionsensor_location. */ + uint8_t location; + + /* Should be element of enum motionsensor_chip. */ + uint8_t chip; + } info; + + /* + * Used for MOTIONSENSE_CMD_EC_RATE, MOTIONSENSE_CMD_SENSOR_ODR, + * MOTIONSENSE_CMD_SENSOR_RANGE, and + * MOTIONSENSE_CMD_KB_WAKE_ANGLE. + */ + struct { + /* Current value of the parameter queried. */ + int32_t ret; + } ec_rate, sensor_odr, sensor_range, kb_wake_angle; + }; +} __packed; + +/*****************************************************************************/ /* USB charging control commands */ /* Set USB port charging mode */ @@ -868,20 +1429,27 @@ struct ec_response_port80_last_boot { } __packed; /*****************************************************************************/ -/* Thermal engine commands */ +/* Thermal engine commands. Note that there are two implementations. We'll + * reuse the command number, but the data and behavior is incompatible. + * Version 0 is what originally shipped on Link. + * Version 1 separates the CPU thermal limits from the fan control. + */ -/* Set thershold value */ #define EC_CMD_THERMAL_SET_THRESHOLD 0x50 +#define EC_CMD_THERMAL_GET_THRESHOLD 0x51 + +/* The version 0 structs are opaque. You have to know what they are for + * the get/set commands to make any sense. + */ +/* Version 0 - set */ struct ec_params_thermal_set_threshold { uint8_t sensor_type; uint8_t threshold_id; uint16_t value; } __packed; -/* Get threshold value */ -#define EC_CMD_THERMAL_GET_THRESHOLD 0x51 - +/* Version 0 - get */ struct ec_params_thermal_get_threshold { uint8_t sensor_type; uint8_t threshold_id; @@ -891,6 +1459,41 @@ struct ec_response_thermal_get_threshold { uint16_t value; } __packed; + +/* The version 1 structs are visible. */ +enum ec_temp_thresholds { + EC_TEMP_THRESH_WARN = 0, + EC_TEMP_THRESH_HIGH, + EC_TEMP_THRESH_HALT, + + EC_TEMP_THRESH_COUNT +}; + +/* Thermal configuration for one temperature sensor. Temps are in degrees K. + * Zero values will be silently ignored by the thermal task. + */ +struct ec_thermal_config { + uint32_t temp_host[EC_TEMP_THRESH_COUNT]; /* levels of hotness */ + uint32_t temp_fan_off; /* no active cooling needed */ + uint32_t temp_fan_max; /* max active cooling needed */ +} __packed; + +/* Version 1 - get config for one sensor. */ +struct ec_params_thermal_get_threshold_v1 { + uint32_t sensor_num; +} __packed; +/* This returns a struct ec_thermal_config */ + +/* Version 1 - set config for one sensor. + * Use read-modify-write for best results! */ +struct ec_params_thermal_set_threshold_v1 { + uint32_t sensor_num; + struct ec_thermal_config cfg; +} __packed; +/* This returns no data */ + +/****************************************************************************/ + /* Toggle automatic fan control */ #define EC_CMD_THERMAL_AUTO_FAN_CTRL 0x52 @@ -920,6 +1523,18 @@ struct ec_params_tmp006_set_calibration { float b2; } __packed; +/* Read raw TMP006 data */ +#define EC_CMD_TMP006_GET_RAW 0x55 + +struct ec_params_tmp006_get_raw { + uint8_t index; +} __packed; + +struct ec_response_tmp006_get_raw { + int32_t t; /* In 1/100 K */ + int32_t v; /* In nV */ +}; + /*****************************************************************************/ /* MKBP - Matrix KeyBoard Protocol */ @@ -1118,11 +1733,41 @@ struct ec_params_switch_enable_backlight { /* Enable/disable WLAN/Bluetooth */ #define EC_CMD_SWITCH_ENABLE_WIRELESS 0x91 +#define EC_VER_SWITCH_ENABLE_WIRELESS 1 -struct ec_params_switch_enable_wireless { +/* Version 0 params; no response */ +struct ec_params_switch_enable_wireless_v0 { uint8_t enabled; } __packed; +/* Version 1 params */ +struct ec_params_switch_enable_wireless_v1 { + /* Flags to enable now */ + uint8_t now_flags; + + /* Which flags to copy from now_flags */ + uint8_t now_mask; + + /* + * Flags to leave enabled in S3, if they're on at the S0->S3 + * transition. (Other flags will be disabled by the S0->S3 + * transition.) + */ + uint8_t suspend_flags; + + /* Which flags to copy from suspend_flags */ + uint8_t suspend_mask; +} __packed; + +/* Version 1 response */ +struct ec_response_switch_enable_wireless_v1 { + /* Flags to enable now */ + uint8_t now_flags; + + /* Flags to leave enabled in S3 */ + uint8_t suspend_flags; +} __packed; + /*****************************************************************************/ /* GPIO commands. Only available on EC if write protect has been disabled. */ @@ -1147,11 +1792,16 @@ struct ec_response_gpio_get { /*****************************************************************************/ /* I2C commands. Only available when flash write protect is unlocked. */ +/* + * TODO(crosbug.com/p/23570): These commands are deprecated, and will be + * removed soon. Use EC_CMD_I2C_XFER instead. + */ + /* Read I2C bus */ #define EC_CMD_I2C_READ 0x94 struct ec_params_i2c_read { - uint16_t addr; + uint16_t addr; /* 8-bit address (7-bit shifted << 1) */ uint8_t read_size; /* Either 8 or 16. */ uint8_t port; uint8_t offset; @@ -1165,7 +1815,7 @@ struct ec_response_i2c_read { struct ec_params_i2c_write { uint16_t data; - uint16_t addr; + uint16_t addr; /* 8-bit address (7-bit shifted << 1) */ uint8_t write_size; /* Either 8 or 16. */ uint8_t port; uint8_t offset; @@ -1174,11 +1824,20 @@ struct ec_params_i2c_write { /*****************************************************************************/ /* Charge state commands. Only available when flash write protect unlocked. */ -/* Force charge state machine to stop in idle mode */ -#define EC_CMD_CHARGE_FORCE_IDLE 0x96 +/* Force charge state machine to stop charging the battery or force it to + * discharge the battery. + */ +#define EC_CMD_CHARGE_CONTROL 0x96 +#define EC_VER_CHARGE_CONTROL 1 -struct ec_params_force_idle { - uint8_t enabled; +enum ec_charge_control_mode { + CHARGE_CONTROL_NORMAL = 0, + CHARGE_CONTROL_IDLE, + CHARGE_CONTROL_DISCHARGE, +}; + +struct ec_params_charge_control { + uint32_t mode; /* enum charge_control_mode */ } __packed; /*****************************************************************************/ @@ -1206,14 +1865,231 @@ struct ec_params_force_idle { #define EC_CMD_BATTERY_CUT_OFF 0x99 /*****************************************************************************/ -/* Temporary debug commands. TODO: remove this crosbug.com/p/13849 */ +/* USB port mux control. */ /* - * Dump charge state machine context. - * - * Response is a binary dump of charge state machine context. + * Switch USB mux or return to automatic switching. + */ +#define EC_CMD_USB_MUX 0x9a + +struct ec_params_usb_mux { + uint8_t mux; +} __packed; + +/*****************************************************************************/ +/* LDOs / FETs control. */ + +enum ec_ldo_state { + EC_LDO_STATE_OFF = 0, /* the LDO / FET is shut down */ + EC_LDO_STATE_ON = 1, /* the LDO / FET is ON / providing power */ +}; + +/* + * Switch on/off a LDO. + */ +#define EC_CMD_LDO_SET 0x9b + +struct ec_params_ldo_set { + uint8_t index; + uint8_t state; +} __packed; + +/* + * Get LDO state. + */ +#define EC_CMD_LDO_GET 0x9c + +struct ec_params_ldo_get { + uint8_t index; +} __packed; + +struct ec_response_ldo_get { + uint8_t state; +} __packed; + +/*****************************************************************************/ +/* Power info. */ + +/* + * Get power info. + */ +#define EC_CMD_POWER_INFO 0x9d + +struct ec_response_power_info { + uint32_t usb_dev_type; + uint16_t voltage_ac; + uint16_t voltage_system; + uint16_t current_system; + uint16_t usb_current_limit; +} __packed; + +/*****************************************************************************/ +/* I2C passthru command */ + +#define EC_CMD_I2C_PASSTHRU 0x9e + +/* Slave address is 10 (not 7) bit */ +#define EC_I2C_FLAG_10BIT (1 << 16) + +/* Read data; if not present, message is a write */ +#define EC_I2C_FLAG_READ (1 << 15) + +/* Mask for address */ +#define EC_I2C_ADDR_MASK 0x3ff + +#define EC_I2C_STATUS_NAK (1 << 0) /* Transfer was not acknowledged */ +#define EC_I2C_STATUS_TIMEOUT (1 << 1) /* Timeout during transfer */ + +/* Any error */ +#define EC_I2C_STATUS_ERROR (EC_I2C_STATUS_NAK | EC_I2C_STATUS_TIMEOUT) + +struct ec_params_i2c_passthru_msg { + uint16_t addr_flags; /* I2C slave address (7 or 10 bits) and flags */ + uint16_t len; /* Number of bytes to read or write */ +} __packed; + +struct ec_params_i2c_passthru { + uint8_t port; /* I2C port number */ + uint8_t num_msgs; /* Number of messages */ + struct ec_params_i2c_passthru_msg msg[]; + /* Data to write for all messages is concatenated here */ +} __packed; + +struct ec_response_i2c_passthru { + uint8_t i2c_status; /* Status flags (EC_I2C_STATUS_...) */ + uint8_t num_msgs; /* Number of messages processed */ + uint8_t data[]; /* Data read by messages concatenated here */ +} __packed; + +/*****************************************************************************/ +/* Power button hang detect */ + +#define EC_CMD_HANG_DETECT 0x9f + +/* Reasons to start hang detection timer */ +/* Power button pressed */ +#define EC_HANG_START_ON_POWER_PRESS (1 << 0) + +/* Lid closed */ +#define EC_HANG_START_ON_LID_CLOSE (1 << 1) + + /* Lid opened */ +#define EC_HANG_START_ON_LID_OPEN (1 << 2) + +/* Start of AP S3->S0 transition (booting or resuming from suspend) */ +#define EC_HANG_START_ON_RESUME (1 << 3) + +/* Reasons to cancel hang detection */ + +/* Power button released */ +#define EC_HANG_STOP_ON_POWER_RELEASE (1 << 8) + +/* Any host command from AP received */ +#define EC_HANG_STOP_ON_HOST_COMMAND (1 << 9) + +/* Stop on end of AP S0->S3 transition (suspending or shutting down) */ +#define EC_HANG_STOP_ON_SUSPEND (1 << 10) + +/* + * If this flag is set, all the other fields are ignored, and the hang detect + * timer is started. This provides the AP a way to start the hang timer + * without reconfiguring any of the other hang detect settings. Note that + * you must previously have configured the timeouts. + */ +#define EC_HANG_START_NOW (1 << 30) + +/* + * If this flag is set, all the other fields are ignored (including + * EC_HANG_START_NOW). This provides the AP a way to stop the hang timer + * without reconfiguring any of the other hang detect settings. */ -#define EC_CMD_CHARGE_DUMP 0xa0 +#define EC_HANG_STOP_NOW (1 << 31) + +struct ec_params_hang_detect { + /* Flags; see EC_HANG_* */ + uint32_t flags; + + /* Timeout in msec before generating host event, if enabled */ + uint16_t host_event_timeout_msec; + + /* Timeout in msec before generating warm reboot, if enabled */ + uint16_t warm_reboot_timeout_msec; +} __packed; + +/*****************************************************************************/ +/* Commands for battery charging */ + +/* + * This is the single catch-all host command to exchange data regarding the + * charge state machine (v2 and up). + */ +#define EC_CMD_CHARGE_STATE 0xa0 + +/* Subcommands for this host command */ +enum charge_state_command { + CHARGE_STATE_CMD_GET_STATE, + CHARGE_STATE_CMD_GET_PARAM, + CHARGE_STATE_CMD_SET_PARAM, + CHARGE_STATE_NUM_CMDS +}; + +/* + * Known param numbers are defined here. Ranges are reserved for board-specific + * params, which are handled by the particular implementations. + */ +enum charge_state_params { + CS_PARAM_CHG_VOLTAGE, /* charger voltage limit */ + CS_PARAM_CHG_CURRENT, /* charger current limit */ + CS_PARAM_CHG_INPUT_CURRENT, /* charger input current limit */ + CS_PARAM_CHG_STATUS, /* charger-specific status */ + CS_PARAM_CHG_OPTION, /* charger-specific options */ + /* How many so far? */ + CS_NUM_BASE_PARAMS, + + /* Range for CONFIG_CHARGER_PROFILE_OVERRIDE params */ + CS_PARAM_CUSTOM_PROFILE_MIN = 0x10000, + CS_PARAM_CUSTOM_PROFILE_MAX = 0x1ffff, + + /* Other custom param ranges go here... */ +}; + +struct ec_params_charge_state { + uint8_t cmd; /* enum charge_state_command */ + union { + struct { + /* no args */ + } get_state; + + struct { + uint32_t param; /* enum charge_state_param */ + } get_param; + + struct { + uint32_t param; /* param to set */ + uint32_t value; /* value to set */ + } set_param; + }; +} __packed; + +struct ec_response_charge_state { + union { + struct { + int ac; + int chg_voltage; + int chg_current; + int chg_input_current; + int batt_state_of_charge; + } get_state; + + struct { + uint32_t value; + } get_param; + struct { + /* no return values */ + } set_param; + }; +} __packed; + /* * Set maximum battery charging current. @@ -1221,15 +2097,59 @@ struct ec_params_force_idle { #define EC_CMD_CHARGE_CURRENT_LIMIT 0xa1 struct ec_params_current_limit { - uint32_t limit; + uint32_t limit; /* in mA */ +} __packed; + +/* + * Set maximum external power current. + */ +#define EC_CMD_EXT_POWER_CURRENT_LIMIT 0xa2 + +struct ec_params_ext_power_current_limit { + uint32_t limit; /* in mA */ +} __packed; + +/*****************************************************************************/ +/* Smart battery pass-through */ + +/* Get / Set 16-bit smart battery registers */ +#define EC_CMD_SB_READ_WORD 0xb0 +#define EC_CMD_SB_WRITE_WORD 0xb1 + +/* Get / Set string smart battery parameters + * formatted as SMBUS "block". + */ +#define EC_CMD_SB_READ_BLOCK 0xb2 +#define EC_CMD_SB_WRITE_BLOCK 0xb3 + +struct ec_params_sb_rd { + uint8_t reg; +} __packed; + +struct ec_response_sb_rd_word { + uint16_t value; +} __packed; + +struct ec_params_sb_wr_word { + uint8_t reg; + uint16_t value; +} __packed; + +struct ec_response_sb_rd_block { + uint8_t data[32]; +} __packed; + +struct ec_params_sb_wr_block { + uint8_t reg; + uint16_t data[32]; } __packed; /*****************************************************************************/ /* System commands */ /* - * TODO: this is a confusing name, since it doesn't necessarily reboot the EC. - * Rename to "set image" or something similar. + * TODO(crosbug.com/p/23747): This is a confusing name, since it doesn't + * necessarily reboot the EC. Rename to "image" or something similar? */ #define EC_CMD_REBOOT_EC 0xd2 @@ -1308,6 +2228,7 @@ struct ec_params_reboot_ec { #define EC_CMD_ACPI_QUERY_EVENT 0x84 /* Valid addresses in ACPI memory space, for read/write commands */ + /* Memory space version; set to EC_ACPI_MEM_VERSION_CURRENT */ #define EC_ACPI_MEM_VERSION 0x00 /* @@ -1317,8 +2238,60 @@ struct ec_params_reboot_ec { #define EC_ACPI_MEM_TEST 0x01 /* Test compliment; writes here are ignored. */ #define EC_ACPI_MEM_TEST_COMPLIMENT 0x02 + /* Keyboard backlight brightness percent (0 - 100) */ #define EC_ACPI_MEM_KEYBOARD_BACKLIGHT 0x03 +/* DPTF Target Fan Duty (0-100, 0xff for auto/none) */ +#define EC_ACPI_MEM_FAN_DUTY 0x04 + +/* + * DPTF temp thresholds. Any of the EC's temp sensors can have up to two + * independent thresholds attached to them. The current value of the ID + * register determines which sensor is affected by the THRESHOLD and COMMIT + * registers. The THRESHOLD register uses the same EC_TEMP_SENSOR_OFFSET scheme + * as the memory-mapped sensors. The COMMIT register applies those settings. + * + * The spec does not mandate any way to read back the threshold settings + * themselves, but when a threshold is crossed the AP needs a way to determine + * which sensor(s) are responsible. Each reading of the ID register clears and + * returns one sensor ID that has crossed one of its threshold (in either + * direction) since the last read. A value of 0xFF means "no new thresholds + * have tripped". Setting or enabling the thresholds for a sensor will clear + * the unread event count for that sensor. + */ +#define EC_ACPI_MEM_TEMP_ID 0x05 +#define EC_ACPI_MEM_TEMP_THRESHOLD 0x06 +#define EC_ACPI_MEM_TEMP_COMMIT 0x07 +/* + * Here are the bits for the COMMIT register: + * bit 0 selects the threshold index for the chosen sensor (0/1) + * bit 1 enables/disables the selected threshold (0 = off, 1 = on) + * Each write to the commit register affects one threshold. + */ +#define EC_ACPI_MEM_TEMP_COMMIT_SELECT_MASK (1 << 0) +#define EC_ACPI_MEM_TEMP_COMMIT_ENABLE_MASK (1 << 1) +/* + * Example: + * + * Set the thresholds for sensor 2 to 50 C and 60 C: + * write 2 to [0x05] -- select temp sensor 2 + * write 0x7b to [0x06] -- C_TO_K(50) - EC_TEMP_SENSOR_OFFSET + * write 0x2 to [0x07] -- enable threshold 0 with this value + * write 0x85 to [0x06] -- C_TO_K(60) - EC_TEMP_SENSOR_OFFSET + * write 0x3 to [0x07] -- enable threshold 1 with this value + * + * Disable the 60 C threshold, leaving the 50 C threshold unchanged: + * write 2 to [0x05] -- select temp sensor 2 + * write 0x1 to [0x07] -- disable threshold 1 + */ + +/* DPTF battery charging current limit */ +#define EC_ACPI_MEM_CHARGING_LIMIT 0x08 + +/* Charging limit is specified in 64 mA steps */ +#define EC_ACPI_MEM_CHARGING_LIMIT_STEP_MA 64 +/* Value to disable DPTF battery charging limit */ +#define EC_ACPI_MEM_CHARGING_LIMIT_DISABLED 0xff /* Current version of ACPI memory address space */ #define EC_ACPI_MEM_VERSION_CURRENT 1 @@ -1360,10 +2333,21 @@ struct ec_params_reboot_ec { * Header bytes greater than this indicate a later version. For example, * EC_CMD_VERSION0 + 1 means we are using version 1. * - * The old EC interface must not use commands 0dc or higher. + * The old EC interface must not use commands 0xdc or higher. */ #define EC_CMD_VERSION0 0xdc #endif /* !__ACPI__ */ +/*****************************************************************************/ +/* + * Deprecated constants. These constants have been renamed for clarity. The + * meaning and size has not changed. Programs that use the old names should + * switch to the new names soon, as the old names may not be carried forward + * forever. + */ +#define EC_HOST_PARAM_SIZE EC_PROTO2_MAX_PARAM_SIZE +#define EC_LPC_ADDR_OLD_PARAM EC_HOST_CMD_REGION1 +#define EC_OLD_PARAM_SIZE EC_HOST_CMD_REGION_SIZE + #endif /* __CROS_EC_COMMANDS_H */ -- 1.9.1.423.g4596e3a -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
