Trigger type needs to be IRQ_TYPE_LEVEL_HIGH since the interrupt
signal gets inverted by the PMC (configured by the invert-interrupt
property).
Signed-off-by: Stefan Agner <stefan@xxxxxxxx>
---
I could not test that patch since I don't have such hardware.
However, I stumbled on that error while tracing a similar error
on Colibri T30.
arch/arm/boot/dts/tegra114-dalmore.dts | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index 73aecfb..f5025fc 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -888,8 +888,9 @@
palmas: tps65913@58 {
compatible = "ti,palmas";
reg = <0x58>;
- interrupts = <0 86 IRQ_TYPE_LEVEL_LOW>;
+ /* active-low configured by PMC invert-interrupt */
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
interrupt-controller;
--
1.8.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
