GK20A's timer is directly attached to the system timer and cannot be calibrated. Skip the calibration phase on that chip since the corresponding registers do not exist. Signed-off-by: Alexandre Courbot <acourbot@xxxxxxxxxx> --- drivers/gpu/drm/nouveau/core/subdev/timer/nv04.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/nouveau/core/subdev/timer/nv04.c b/drivers/gpu/drm/nouveau/core/subdev/timer/nv04.c index c0bdd10..822fe0d 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/timer/nv04.c +++ b/drivers/gpu/drm/nouveau/core/subdev/timer/nv04.c @@ -185,6 +185,10 @@ nv04_timer_init(struct nouveau_object *object) if (ret) return ret; + /* gk20a does not have the calibration registers */ + if (device->chipset == 0xea) + goto skip_clk_init; + /* aim for 31.25MHz, which gives us nanosecond timestamps */ d = 1000000 / 32; @@ -235,20 +239,23 @@ nv04_timer_init(struct nouveau_object *object) d >>= 1; } - /* restore the time before suspend */ - lo = priv->suspend_time; - hi = (priv->suspend_time >> 32); - nv_debug(priv, "input frequency : %dHz\n", f); nv_debug(priv, "input multiplier: %d\n", m); nv_debug(priv, "numerator : 0x%08x\n", n); nv_debug(priv, "denominator : 0x%08x\n", d); nv_debug(priv, "timer frequency : %dHz\n", (f * m) * d / n); - nv_debug(priv, "time low : 0x%08x\n", lo); - nv_debug(priv, "time high : 0x%08x\n", hi); nv_wr32(priv, NV04_PTIMER_NUMERATOR, n); nv_wr32(priv, NV04_PTIMER_DENOMINATOR, d); + +skip_clk_init: + /* restore the time before suspend */ + lo = priv->suspend_time; + hi = (priv->suspend_time >> 32); + + nv_debug(priv, "time low : 0x%08x\n", lo); + nv_debug(priv, "time high : 0x%08x\n", hi); + nv_wr32(priv, NV04_PTIMER_INTR_0, 0xffffffff); nv_wr32(priv, NV04_PTIMER_INTR_EN_0, 0x00000000); nv_wr32(priv, NV04_PTIMER_TIME_1, hi); -- 1.8.5.3 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
