On Thursday 26 December 2013 14:52:10 Marc Dietrich wrote: > On Saturday 21 December 2013 23:11:58 Marc Dietrich wrote: > > Sorry, Stephen, I mistyped your email address in the first post. > > > > On Saturday 21 December 2013 21:38:13 Marc Dietrich wrote: > > > Add backlight and panel nodes for the PAZ00 TFT LCD panel. > > > > > > Signed-off-by: Marc Dietrich <marvin24@xxxxxx> > > > --- > > > This should enable everything needed. Unfortunately, in my tests it only > > > switches on the backlight, but the display controller blocks in some > > > infinit loop, so we get no output (and no working system). I post it > > > here > > > in case I missed something obvious... > > Some users reported that it works when using uboot (yeah, shame on me that I > still use fastboot on my dev machine), so I did a bit more research. It > indeed works when using uboot, even when the display setup is disabled > there. So my guess is that maybe some clock isn't setup by fastboot which > is done by uboot. ok, to bring this self-conversation to an end, the cpu blocks at a memory barrier right after value = tegra_dc_readl(rgb->dc, DC_CMD_DISPLAY_COMMAND); in tegra_output_rgb_disable (rgb.c). -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
