Add backlight and panel nodes for the PAZ00 TFT LCD panel.
Signed-off-by: Marc Dietrich <marvin24@xxxxxx>
---
This should enable everything needed. Unfortunately, in my tests it only switches on the
backlight, but the display controller blocks in some infinit loop, so we get no output
(and no working system). I post it here in case I missed something obvious...
arch/arm/boot/dts/tegra20-paz00.dts | 46 ++++++++++++++++++++++++++++++++++-
1 file changed, 45 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index c7cd8e6..9a39a80 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -17,6 +17,14 @@
};
host1x@50000000 {
+ dc@54200000 {
+ rgb {
+ status = "okay";
+
+ nvidia,panel = <&panel>;
+ };
+ };
+
hdmi@54280000 {
status = "okay";
@@ -257,7 +265,11 @@
status = "okay";
};
- i2c@7000c000 {
+ pwm: pwm@7000a000 {
+ status = "okay";
+ };
+
+ lvds_ddc: i2c@7000c000 {
status = "okay";
clock-frequency = <400000>;
@@ -475,6 +487,18 @@
non-removable;
};
+ backlight: backlight {
+ compatible = "pwm-backlight";
+
+ enable-gpios = <&gpio TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
+ pwms = <&pwm 0 5000000>;
+
+ brightness-levels = <0 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240 255>;
+ default-brightness-level = <10>;
+
+ backlight-boot-off;
+ };
+
clocks {
compatible = "simple-bus";
#address-cells = <1>;
@@ -509,6 +533,16 @@
};
};
+ panel: panel {
+ compatible = "samsung,ltn101nt05", "simple-panel";
+
+ ddc-i2c-bus = <&lvds_ddc>;
+ power-supply = <&vdd_pnl_reg>;
+ enable-gpios = <&gpio TEGRA_GPIO(M, 6) GPIO_ACTIVE_HIGH>;
+
+ backlight = <&backlight>;
+ };
+
regulators {
compatible = "simple-bus";
#address-cells = <1>;
@@ -522,6 +556,16 @@
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
+
+ vdd_pnl_reg: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "+3VS,vdd_pnl";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio TEGRA_GPIO(A, 4) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
};
sound {
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
