Dalmore has a 10.1" WUXGA panel connected to one of the DSI outputs of
the Tegra114.
Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
---
Changes in v3:
- make panel a peripheral on the DSI bus
Changes in v2:
- remove backlight-boot-off property for now
- don't renumber all regulators
arch/arm/boot/dts/tegra114-dalmore.dts | 44 ++++++++++++++++++++++++----------
1 file changed, 32 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index ca4485903b9d..512922f049c3 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -16,6 +16,21 @@
reg = <0x80000000 0x40000000>;
};
+ host1x@50000000 {
+ dsi@54300000 {
+ status = "okay";
+
+ panel@0 {
+ compatible = "panasonic,vvx10f004b00",
+ "simple-panel";
+ reg = <0>;
+
+ power-supply = <&avdd_lcd_reg>;
+ backlight = <&backlight>;
+ };
+ };
+ };
+
pinmux@70000868 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -723,6 +738,10 @@
status = "okay";
};
+ pwm@7000a000 {
+ status = "okay";
+ };
+
i2c@7000c000 {
status = "okay";
clock-frequency = <100000>;
@@ -811,7 +830,7 @@
regulator-boot-on;
};
- fet1 {
+ vdd_bl_reg: fet1 {
regulator-name = "vdd-lcd-bl";
};
@@ -819,7 +838,7 @@
regulator-name = "vdd-modem-3v3";
};
- fet4 {
+ avdd_lcd_reg: fet4 {
regulator-name = "avdd-lcd";
};
@@ -1089,6 +1108,17 @@
vbus-supply = <&usb3_vbus_reg>;
};
+ backlight: backlight {
+ compatible = "pwm-backlight";
+
+ enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+ power-supply = <&vdd_bl_reg>;
+ pwms = <&pwm 1 1000000>;
+
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ };
+
clocks {
compatible = "simple-bus";
#address-cells = <1>;
@@ -1155,16 +1185,6 @@
gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
};
- lcd_bl_en_reg: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "lcd_bl_en";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
- };
-
usb1_vbus_reg: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
--
1.8.4.2
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
