Re: Trimslice Barebone fails to detect HDMI connection, no DDC i2c channel present

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12/11/2013 02:49 PM, Liviu Dudau wrote:
> Hello,
> 
> Prompted by a discussion on G+, here is a report of an issue I'm seeing
> with mainline kernel (commit 78fd82238d0e57).
> 
> The kernel fails to detect the DDC i2c interface (on Trimslice that's
> on Tegra2 I2C-0 interface), so I'm getting no output on the HDMI

That probably should be I2C-1 for HDMI; I2C-0 is likely the DVI port's
DDC interface. But since you tested all ports, this isn't the cause of
the problem.

> U-Boot 2014.01-rc1-dirty (Nov 26 2013 - 22:29:37)

Are you using an unmodified upstream U-Boot? The environment you posted
doesn't match upstream's environment, and the "-dirty" implies you have
some local modifications.

If you break into U-Boot, can you read the EDID using the "i2c" command?

In Linux, can you "i2cget" from bus 1 device 0x50 even if "i2cdetect"
didn't see the EDID?

Is the monitor you have plugged in known-working without any
EDID-related issues?
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux