On 11/11/2013 01:31 AM, Hiroshi Doyu wrote:
> Create a header file to define the swgroup IDs used by the IOMMU(SMMU)
> binding. "swgroup" is a group of H/W clients which a Tegra SoC
> supports. This unique ID can be used to calculate MC_SMMU_<swgroup
> name>_ASID_0 register offset and MC_<swgroup name>_HOTRESET_*_0
> register bit. This will allow the same header to be used by both
> device tree files, and drivers implementing this binding, which
> guarantees that the two stay in sync. This also makes device trees
> more readable by using names instead of magic numbers. For HOTRESET
> bit shifting we need another conversion table, which will come later.
> diff --git a/include/dt-bindings/memory/tegra-swgroup.h b/include/dt-bindings/memory/tegra-swgroup.h
> +#define TEGRA_SWGROUP_PPCS2 32 /* 0xab0 */
> +
> +#define TEGRA_SWGROUP_MAX 64
> +
> +#define TEGRA_SWGROUP_BIT(x) (1ULL << TEGRA_SWGROUP_##x)
If I put the following into a DT and compile it:
#define TEGRA_SWGROUP_PPCS2 32 /* 0xab0 */
#define TEGRA_SWGROUP_BIT(x) (1ULL << TEGRA_SWGROUP_##x)
/ {
test-prop = <(TEGRA_SWGROUP_BIT(PPCS2))>;
};
I get:
Error: arch/arm/boot/dts/tegra20.dtsi:11.28-29 integer value out of
range 0000000000000020 (32 bits)
FATAL ERROR: Syntax error parsing input tree
Is TEGRA_SWGROUP_BIT() not meant to be used in DT files? If it is, the
definition is broken. If it is not, it should be defined in the driver
not the header, since DT files have no use for it.
Note: I mentioned this issue last time I reviewed this patch:-(
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
