On Wed, Oct 30, 2013 at 04:41:41PM +0100, Stephen Warren wrote:
> On 10/29/2013 06:41 PM, Peter De Schrijver wrote:
> > Use pll_ref instead of pll_re_vco as the pll_e parent on Tegra114 and
> > Tegra124. Also add a pll_ref table entry for pll_e for Tegra114.
>
> Why? What benefit does this give, or what bug does this fix?
>
Otherrwise Tegra114 will crash on boot.
> > diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
>
> > val_aux = pll_readl(pll_params->aux_reg, pll);
> >
> > if (val & PLL_BASE_ENABLE) {
> > - if (!(val_aux & PLLE_AUX_PLLRE_SEL))
> > + if ((val_aux & PLLE_AUX_PLLRE_SEL) || (val_aux & val_aux))
>
> Isn't "|| (val_aux & val_aux)" always true, at least if the value is
> non-zero? Either this should be simply "|| val_aux", or one of those two
> "val_aux" is the wrong thing.
>
It should have been val_aux & PLLE_AUX_PLLP_SEL...
Cheers,
Peter.
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
