From: Mark Brown <broonie@xxxxxxxxxx>
This is a half done conversion with minimal code reorganisation provided
for bisection purposes. A further patch will move the first transfer
preparation into tegra_slink_prepare_message().
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
---
drivers/spi/spi-tegra20-slink.c | 88 +++++++++++++++++++++--------------------
1 file changed, 46 insertions(+), 42 deletions(-)
diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c
index f8d4ef5..bb28033 100644
--- a/drivers/spi/spi-tegra20-slink.c
+++ b/drivers/spi/spi-tegra20-slink.c
@@ -196,6 +196,7 @@ struct tegra_slink_data {
u32 rx_status;
u32 status_reg;
bool is_packed;
+ bool is_first_msg;
unsigned long packed_size;
u32 command_reg;
@@ -823,55 +824,56 @@ static int tegra_slink_setup(struct spi_device *spi)
return 0;
}
-static int tegra_slink_transfer_one_message(struct spi_master *master,
- struct spi_message *msg)
+static int tegra_slink_prepare_message(struct spi_master *master,
+ struct spi_message *msg)
{
- bool is_first_msg = true;
struct tegra_slink_data *tspi = spi_master_get_devdata(master);
- struct spi_transfer *xfer;
- struct spi_device *spi = msg->spi;
- int ret;
- msg->status = 0;
- msg->actual_length = 0;
+ tspi->is_first_msg = true;
- list_for_each_entry(xfer, &msg->transfers, transfer_list) {
- INIT_COMPLETION(tspi->xfer_completion);
- ret = tegra_slink_start_transfer_one(spi, xfer, is_first_msg);
- if (ret < 0) {
- dev_err(tspi->dev,
- "spi can not start transfer, err %d\n", ret);
- goto exit;
- }
- is_first_msg = false;
- ret = wait_for_completion_timeout(&tspi->xfer_completion,
- SLINK_DMA_TIMEOUT);
- if (WARN_ON(ret == 0)) {
- dev_err(tspi->dev,
- "spi trasfer timeout, err %d\n", ret);
- ret = -EIO;
- goto exit;
- }
+ return 0;
+}
- if (tspi->tx_status || tspi->rx_status) {
- dev_err(tspi->dev, "Error in Transfer\n");
- ret = -EIO;
- goto exit;
- }
- msg->actual_length += xfer->len;
- if (xfer->cs_change && xfer->delay_usecs) {
- tegra_slink_writel(tspi, tspi->def_command_reg,
- SLINK_COMMAND);
- udelay(xfer->delay_usecs);
- }
+static int tegra_slink_transfer_one(struct spi_master *master,
+ struct spi_device *spi,
+ struct spi_transfer *xfer)
+{
+ struct tegra_slink_data *tspi = spi_master_get_devdata(master);
+ int ret;
+
+ INIT_COMPLETION(tspi->xfer_completion);
+ ret = tegra_slink_start_transfer_one(spi, xfer, tspi->is_first_msg);
+ if (ret < 0) {
+ dev_err(tspi->dev,
+ "spi can not start transfer, err %d\n", ret);
+ return ret;
}
- ret = 0;
-exit:
+ tspi->is_first_msg = false;
+ ret = wait_for_completion_timeout(&tspi->xfer_completion,
+ SLINK_DMA_TIMEOUT);
+ if (WARN_ON(ret == 0)) {
+ dev_err(tspi->dev,
+ "spi trasfer timeout, err %d\n", ret);
+ return -EIO;
+ }
+
+ if (tspi->tx_status)
+ return tspi->tx_status;
+ if (tspi->rx_status)
+ return tspi->rx_status;
+
+ return 0;
+}
+
+static int tegra_slink_unprepare_message(struct spi_master *master,
+ struct spi_message *msg)
+{
+ struct tegra_slink_data *tspi = spi_master_get_devdata(master);
+
tegra_slink_writel(tspi, tspi->def_command_reg, SLINK_COMMAND);
tegra_slink_writel(tspi, tspi->def_command2_reg, SLINK_COMMAND2);
- msg->status = ret;
- spi_finalize_current_message(master);
- return ret;
+
+ return 0;
}
static irqreturn_t handle_cpu_based_xfer(struct tegra_slink_data *tspi)
@@ -1074,7 +1076,9 @@ static int tegra_slink_probe(struct platform_device *pdev)
/* the spi->mode bits understood by this driver: */
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
master->setup = tegra_slink_setup;
- master->transfer_one_message = tegra_slink_transfer_one_message;
+ master->prepare_message = tegra_slink_prepare_message;
+ master->transfer_one = tegra_slink_transfer_one;
+ master->unprepare_message = tegra_slink_unprepare_message;
master->auto_runtime_pm = true;
master->num_chipselect = MAX_CHIP_SELECT;
master->bus_num = -1;
--
1.8.4.rc3
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
