Re: [PATCH] gpu: host1x: Add MIPI pad calibration support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10/16/2013 11:36 AM, Thierry Reding wrote:
> This driver adds support to perform calibration of the MIPI pads for CSI
> and DSI.

This binding looks conceptually OK to me. I have one non-semantic
comment about the property names below though.

I would like one of the DT bindings maintainers to ack/review it though.

> diff --git a/Documentation/devicetree/bindings/misc/nvidia,tegra114-mipi.txt b/Documentation/devicetree/bindings/misc/nvidia,tegra114-mipi.txt
> new file mode 100644
> index 0000000..642c5d8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/misc/nvidia,tegra114-mipi.txt
> @@ -0,0 +1,37 @@
> +NVIDIA Tegra MIPI pad calibration controller
> +
> +Required properties:
> +- compatible: "nvidia,tegra<chip>-mipi"
> +- reg: Physical base address and length of the controller's registers.
> +- clocks: The clock consumed by the controller.
> +- #calibrate-cells: Should be 1. The cell is a bitmask of the pads that need
> +  to be calibrated by a given device.
> +
> +User nodes need to contain a calibrate property that has a phandle to refer
> +to the calibration controller node and a bitmask of the pads that need to be
> +calibrated.

#gpio-cells is a generic property that applies to any GPIO user, and
hence has a generic name. #calibrate-cells here doesn't fall into the
same class; it's something very specific to this individual binding. Do
we need a more unique property name, such as
#nvidia,mipi-calibrate-cells, and equally for the consumer to use
nvidia,mipi-calibrate as the property that references the MIPI device,
rather than the generic-sounding "calibrate"?

> +Example:
> +
> +	mipi: mipi@700e3000 {
> +		compatible = "nvidia,tegra114-mipi";
> +		reg = <0x700e3000 0x100>;
> +		clocks = <&tegra_car TEGRA114_CLK_MIPI_CAL>;
> +		#calibrate-cells = <1>;
> +	};
> +
> +	...
> +
> +	host1x@50000000 {
> +		...
> +
> +		dsi@54300000 {
> +			...
> +
> +			calibrate = <&mipi 0x060>;
> +
> +			...
> +		};
> +
> +		...
> +	};

--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux