From: Mikko Perttunen <mperttunen@xxxxxxxxxx>
Add HDMI node to the Dalmore device tree and hook up the VDD and PLL
regulators as well as the I2C adapter used for DDC and the GPIO used
for hotplug detection.
Signed-off-by: Mikko Perttunen <mperttunen@xxxxxxxxxx>
Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
---
arch/arm/boot/dts/tegra114-dalmore.dts | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index ad80ebd..9da04d1 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -12,6 +12,17 @@
};
host1x@50000000 {
+ hdmi@54280000 {
+ status = "okay";
+
+ vdd-supply = <&vdd_hdmi_reg>;
+ pll-supply = <&palmas_smps3_reg>;
+
+ nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+ nvidia,hpd-gpio =
+ <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+ };
+
dsi@54300000 {
status = "okay";
@@ -761,6 +772,10 @@
};
};
+ hdmi_ddc: i2c@7000c700 {
+ status = "okay";
+ };
+
i2c@7000d000 {
status = "okay";
clock-frequency = <400000>;
--
1.8.4
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
