On Thu, Oct 10, 2013 at 12:39:16PM +0200, Thierry Reding wrote:
> * PGP Signed by an unknown key
>
> On Fri, Oct 04, 2013 at 12:12:40PM +0300, Peter De Schrijver wrote:
> > Signed-off-by: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
>
> This is missing a commit description.
>
> > diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
> [...]
> > +const struct clk_ops tegra_clk_pllss_ops = {
>
> static?
>
> > +struct clk *tegra_clk_register_pllss(const char *name, const char *parent_name,
> > + void __iomem *clk_base, unsigned long flags,
> > + unsigned long fixed_rate,
> > + struct tegra_clk_pll_params *pll_params,
> > + struct tegra_clk_pll_freq_table *freq_table,
> > + spinlock_t *lock)
> > +{
> [...]
> > + pll = _tegra_init_pll(clk_base, NULL, fixed_rate, pll_params,
> > + pll_flags, freq_table, lock);
> > +
> > + if (IS_ERR(pll))
>
> I'd leave out the blank line separating the assignment of pll and the
> check for validity. Grouping them together like that makes it
> immediately clear that they belong together.
>
> > + return ERR_CAST(pll);
> > +
> > + val = pll_readl_base(pll);
> > +
> > + if (val & (3 << 25)) {
>
> Same here. Also 3 << 25 could probably be a symbolic constant, something
> like PLLSS_REF_SRC_SEL_MASK perhaps?
>
> > + WARN(1, "Unknown parent selected for %s: %d\n", name,
> > + val >> 25);
>
> Similarly, this should be something like:
>
> (val & PLLSS_REF_SRC_SEL_MASK) >> PLLSS_REF_SRC_SEL_SHIFT
>
> > + kfree(pll);
> > + return ERR_PTR(-EINVAL);
> > + }
> > + _get_pll_mnp(pll, &cfg);
>
> Nit: I'd put a blank line before this, to separate the block and the
> function call. That is:
>
> }
>
> _get_pll_mnp(...);
>
> > +
> > + if (cfg.n > 1) {
> > + WARN(1, "%s should not be initialized\n", name);
> > + kfree(pll);
> > + return ERR_PTR(-EINVAL);
> > + }
>
> Is this really fatal? Can't we just configure the PLL from scratch?
>
> > + parent_rate = __clk_get_rate(parent);
> > +
> > + pll_params->vco_min = _clip_vco_min(pll_params->vco_min, parent_rate);
> > +
> > + cfg.m = _pll_fixed_mdiv(pll_params, parent_rate);
> > + cfg.n = cfg.m * pll_params->vco_min / parent_rate;
> > +
> > + for (i = 0; pll_params->pdiv_tohw[i].pdiv; i++)
> > + ;
> > + cfg.p = pll_params->pdiv_tohw[i-1].hw_val;
>
> Could use a blank line to separate them. Also what if .pdiv of the first
> entry is 0? The loop will terminate on the first run and i will be 0, so
> this would try to access pdiv_tohw[-1]. Can that ever happen?
>
That would be an error. This PLL type always has a post divider table.
I will add a check.
Cheers,
Peter.
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
