This series adds the LP1 support for Tegra124. (suspend to LP2 also supported in this series) Note: This patch series depends on the patch series below. * [PATCH 0/5] Tegra124 clock support * [PATCH V2 0/6] ARM: tegra: basic support for Tegra124 SoC * [PATCH] ARM: tegra: add clock properties for devices of Tegra124 * [PATCH] ARM: tegra: enable Tegra RTC as default for Tegra124 * [PATCH 0/4] ARM: tegra: add CPU hot-plug and idle support for Tegra124 Verified on Cardhu, Dalmore and Venice2 and with THUMB2_KERNEL as well. V2: * remove the patch of "enable Tegra RTC for Venice2" * add new patch of "re-calculate the LP1 data for Tegra30/114" * squash the 2 to 5 into patch 3/4 of this series Joseph Lo (4): clk: tegra124: add suspend/resume function for tegra_cpu_car_ops ARM: tegra: re-calculate the LP1 data for Tegra30/114 ARM: tegra: add LP1 support code for Tegra124 ARM: tegra: enable LP1 suspend mode for Venice2 arch/arm/boot/dts/tegra124-venice2.dts | 7 +++++ arch/arm/mach-tegra/Makefile | 1 + arch/arm/mach-tegra/flowctrl.c | 2 ++ arch/arm/mach-tegra/iomap.h | 3 +++ arch/arm/mach-tegra/pm.c | 12 ++++++--- arch/arm/mach-tegra/sleep-tegra30.S | 49 +++++++++++++++++++++++++--------- drivers/clk/tegra/clk-tegra124.c | 27 +++++++++++++++++++ 7 files changed, 86 insertions(+), 15 deletions(-) -- 1.8.4 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
