From: Darbha Sriharsha <dsriharsha@xxxxxxxxxx>
Adds support for the bq24735 charger chipset. The bq24735 is a
high-efficiency, synchronous battery charger.
It allows control of the charging current, input current, and the charger
voltage DAC's through SMBus.
Signed-off-by: Darbha Sriharsha <dsriharsha@xxxxxxxxxx>
Signed-off-by: Rhyland Klein <rklein@xxxxxxxxxx>
---
v4:
- Added GPIO # to dev_err when gpio_request fails, for verbosity.
v3:
*Note: I decided to maintain non-DT support, but tried to do it in the most
clean manner using the suggestions from Thierry Reding.
- Simplified devicetree bindings for charger current/voltage and input current
- added optional interrupts property for setting client->irq
- renamed ti,ac-detect to ti,ac-detect-gpios
- modeled Kconfig entry after TI BQ24190 entry
- cleaned up whitespace/sorting review comments
- moved register/bit definitions to .c file
- renamed gpio_active_low to status_gpio_active_low
- added status_gpio_valid to handle gpio = 0 as valid
- simplified the struct bq24735_charger -> struct bq24735 and removed
dev and irq fields
- made bq24735[write/read]_word inline functions with error checking at
caller sites
- fixed support for enable/disable and added calls into isr as appropriate
- moved charger present logic into separate function
- moved devm_request_threaded_irq after power_supply_register so we can't
get into the isr with an unregistered power_supply
- removed ifdeffery around CONFIG_OF, using IS_ENABLED() instead
v2:
- gpio_request -> devm_gpio_request
.../bindings/power_supply/ti,bq24735.txt | 28 ++
drivers/power/Kconfig | 6 +
drivers/power/Makefile | 1 +
drivers/power/bq24735-charger.c | 419 ++++++++++++++++++++
include/linux/power/bq24735-charger.h | 39 ++
5 files changed, 493 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power_supply/ti,bq24735.txt
create mode 100644 drivers/power/bq24735-charger.c
create mode 100644 include/linux/power/bq24735-charger.h
diff --git a/Documentation/devicetree/bindings/power_supply/ti,bq24735.txt b/Documentation/devicetree/bindings/power_supply/ti,bq24735.txt
new file mode 100644
index 0000000..67ff4a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/power_supply/ti,bq24735.txt
@@ -0,0 +1,28 @@
+TI BQ24735 Charge Controller
+~~~~~~~~~~
+
+Required properties :
+ - compatible : "ti,bq24735"
+
+Optional properties :
+ - interrupts : Specify the interrupt to be used to trigger when the AC
+ adapter is either plugged in or removed.
+ - ti,ac-detect-gpios : This GPIO is optionally used to read the AC adapter
+ presence.
+ - ti,charge-current : Used to control and set the charging current. This value
+ must be between 128mA and 8.128A with a 64mA step resolution. The POR value
+ is 0x0000h. See spec for more details.
+ - ti,charge-voltage : Used to control and set the charging voltage. This value
+ must be between 1.024V and 19.2V with a 16mV step resolution. The POR value
+ is 0x0000h. See spec for more details.
+ - ti,input-current : Used to control and set the charger input current. This
+ value must be between 128mA and 8.064A with a 128mA step resolution. The
+ POR value is 0x1000h. See spec for more details.
+
+Example:
+
+ bq24735@9 {
+ compatible = "ti,bq24735";
+ reg = <0x9>;
+ ti,ac-detect-gpios = <&gpio 72 0x1>;
+ }
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index e8970a6..655e8bf 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -340,6 +340,12 @@ config CHARGER_BQ24190
help
Say Y to enable support for the TI BQ24190 battery charger.
+config CHARGER_BQ24735
+ tristate "TI BQ24735 battery charger support"
+ depends on I2C && GPIOLIB
+ help
+ Say Y to enable support for the TI BQ24735 battery charger.
+
config CHARGER_SMB347
tristate "Summit Microelectronics SMB347 Battery Charger"
depends on I2C
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 4ae4533..e65487b 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -51,6 +51,7 @@ obj-$(CONFIG_CHARGER_MAX8997) += max8997_charger.o
obj-$(CONFIG_CHARGER_MAX8998) += max8998_charger.o
obj-$(CONFIG_CHARGER_BQ2415X) += bq2415x_charger.o
obj-$(CONFIG_CHARGER_BQ24190) += bq24190_charger.o
+obj-$(CONFIG_CHARGER_BQ24735) += bq24735-charger.o
obj-$(CONFIG_POWER_AVS) += avs/
obj-$(CONFIG_CHARGER_SMB347) += smb347-charger.o
obj-$(CONFIG_CHARGER_TPS65090) += tps65090-charger.o
diff --git a/drivers/power/bq24735-charger.c b/drivers/power/bq24735-charger.c
new file mode 100644
index 0000000..d022b82
--- /dev/null
+++ b/drivers/power/bq24735-charger.c
@@ -0,0 +1,419 @@
+/*
+ * Battery charger driver for TI BQ24735
+ *
+ * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+
+#include <linux/power/bq24735-charger.h>
+
+#define BQ24735_CHG_OPT 0x12
+#define BQ24735_CHG_OPT_CHARGE_DISABLE (1 << 0)
+#define BQ24735_CHG_OPT_AC_PRESENT (1 << 4)
+#define BQ24735_CHARGE_CURRENT 0x14
+#define BQ24735_CHARGE_CURRENT_MASK 0x1fc0
+#define BQ24735_CHARGE_VOLTAGE 0x15
+#define BQ24735_CHARGE_VOLTAGE_MASK 0x7ff0
+#define BQ24735_INPUT_CURRENT 0x3f
+#define BQ24735_INPUT_CURRENT_MASK 0x1f80
+#define BQ24735_MANUFACTURER_ID 0xfe
+#define BQ24735_DEVICE_ID 0xff
+
+struct bq24735 {
+ struct power_supply charger;
+ struct i2c_client *client;
+ struct bq24735_platform *pdata;
+};
+
+static inline struct bq24735 *to_bq24735(struct power_supply *psy)
+{
+ return container_of(psy, struct bq24735, charger);
+}
+
+static enum power_supply_property bq24735_charger_properties[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+};
+
+static inline int bq24735_write_word(struct i2c_client *client, u8 reg,
+ u16 value)
+{
+ return i2c_smbus_write_word_data(client, reg, le16_to_cpu(value));
+}
+
+static inline int bq24735_read_word(struct i2c_client *client, u8 reg)
+{
+ s32 ret = i2c_smbus_read_word_data(client, reg);
+
+ return ret < 0 ? ret : le16_to_cpu(ret);
+}
+
+static int bq24735_update_word(struct i2c_client *client, u8 reg,
+ u16 mask, u16 value)
+{
+ unsigned int tmp;
+ int ret;
+
+ ret = bq24735_read_word(client, reg);
+ if (ret < 0)
+ return ret;
+
+ tmp = ret & ~mask;
+ tmp |= value & mask;
+
+ return bq24735_write_word(client, reg, tmp);
+}
+
+static inline int bq24735_enable_charging(struct bq24735 *charger)
+{
+ return bq24735_update_word(charger->client, BQ24735_CHG_OPT,
+ BQ24735_CHG_OPT_CHARGE_DISABLE,
+ ~BQ24735_CHG_OPT_CHARGE_DISABLE);
+}
+
+static inline int bq24735_disable_charging(struct bq24735 *charger)
+{
+ return bq24735_update_word(charger->client, BQ24735_CHG_OPT,
+ BQ24735_CHG_OPT_CHARGE_DISABLE,
+ BQ24735_CHG_OPT_CHARGE_DISABLE);
+}
+
+static int bq24735_config_charger(struct bq24735 *charger)
+{
+ struct bq24735_platform *pdata = charger->pdata;
+ int ret;
+ u16 value;
+
+ if (pdata->charge_current) {
+ value = pdata->charge_current & BQ24735_CHARGE_CURRENT_MASK;
+
+ ret = bq24735_write_word(charger->client,
+ BQ24735_CHARGE_CURRENT, value);
+ if (ret < 0) {
+ dev_err(&charger->client->dev,
+ "Failed to write charger current : %d\n",
+ ret);
+ return ret;
+ }
+ }
+
+ if (pdata->charge_voltage) {
+ value = pdata->charge_voltage & BQ24735_CHARGE_VOLTAGE_MASK;
+
+ ret = bq24735_write_word(charger->client,
+ BQ24735_CHARGE_VOLTAGE, value);
+ if (ret < 0) {
+ dev_err(&charger->client->dev,
+ "Failed to write charger voltage : %d\n",
+ ret);
+ return ret;
+ }
+ }
+
+ if (pdata->input_current) {
+ value = pdata->input_current & BQ24735_INPUT_CURRENT_MASK;
+
+ ret = bq24735_write_word(charger->client,
+ BQ24735_INPUT_CURRENT, value);
+ if (ret < 0) {
+ dev_err(&charger->client->dev,
+ "Failed to write input current : %d\n",
+ ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static bool bq24735_charger_is_present(struct bq24735 *charger)
+{
+ struct bq24735_platform *pdata = charger->pdata;
+ int ret;
+
+ if (pdata->status_gpio_valid) {
+ ret = gpio_get_value_cansleep(pdata->status_gpio);
+ return ret ^= pdata->status_gpio_active_low == 0;
+ } else {
+ int ac = 0;
+
+ ac = bq24735_read_word(charger->client, BQ24735_CHG_OPT);
+ if (ac < 0) {
+ dev_err(&charger->client->dev,
+ "Failed to read charger options : %d\n",
+ ac);
+ return false;
+ }
+ return (ac & BQ24735_CHG_OPT_AC_PRESENT) ? true : false;
+ }
+
+ return false;
+}
+
+static irqreturn_t bq24735_charger_isr(int irq, void *devid)
+{
+ struct power_supply *psy = devid;
+ struct bq24735 *charger = to_bq24735(psy);
+
+ if (bq24735_charger_is_present(charger))
+ bq24735_enable_charging(charger);
+ else
+ bq24735_disable_charging(charger);
+
+ power_supply_changed(psy);
+
+ return IRQ_HANDLED;
+}
+
+static int bq24735_charger_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct bq24735 *charger;
+
+ charger = container_of(psy, struct bq24735, charger);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = bq24735_charger_is_present(charger) ? 1 : 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct bq24735_platform *bq24735_parse_dt_data(struct i2c_client *client)
+{
+ struct bq24735_platform *pdata;
+ struct device_node *np = client->dev.of_node;
+ u32 val;
+ int ret;
+ enum of_gpio_flags flags;
+
+ pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ dev_err(&client->dev,
+ "Memory alloc for bq24735 pdata failed\n");
+ return NULL;
+ }
+
+ pdata->status_gpio = of_get_named_gpio_flags(np, "ti,ac-detect-gpios",
+ 0, &flags);
+
+ if (flags & OF_GPIO_ACTIVE_LOW)
+ pdata->status_gpio_active_low = 1;
+
+ ret = of_property_read_u32(np, "ti,charge-current", &val);
+ if (!ret)
+ pdata->charge_current = val;
+
+ ret = of_property_read_u32(np, "ti,charge-voltage", &val);
+ if (!ret)
+ pdata->charge_voltage = val;
+
+ ret = of_property_read_u32(np, "ti,input-current", &val);
+ if (!ret)
+ pdata->input_current = val;
+
+ return pdata;
+}
+
+static int bq24735_charger_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ struct bq24735 *charger;
+ struct power_supply *supply;
+ char *name;
+
+ charger = devm_kzalloc(&client->dev, sizeof(*charger), GFP_KERNEL);
+ if (!charger)
+ return -ENOMEM;
+
+ charger->pdata = client->dev.platform_data;
+
+ if (IS_ENABLED(CONFIG_OF) && !charger->pdata && client->dev.of_node)
+ charger->pdata = bq24735_parse_dt_data(client);
+
+ if (!charger->pdata) {
+ dev_err(&client->dev, "no platform data provided\n");
+ return -EINVAL;
+ }
+
+ name = (char *)charger->pdata->name;
+ if (!name) {
+ name = kasprintf(GFP_KERNEL, "bq24735@%s",
+ dev_name(&client->dev));
+ if (!name) {
+ dev_err(&client->dev, "Failed to alloc device name\n");
+ return -ENOMEM;
+ }
+ }
+
+ charger->client = client;
+
+ supply = &charger->charger;
+
+ supply->name = name;
+ supply->type = POWER_SUPPLY_TYPE_MAINS;
+ supply->properties = bq24735_charger_properties;
+ supply->num_properties = ARRAY_SIZE(bq24735_charger_properties);
+ supply->get_property = bq24735_charger_get_property;
+ supply->supplied_to = charger->pdata->supplied_to;
+ supply->num_supplicants = charger->pdata->num_supplicants;
+ supply->of_node = client->dev.of_node;
+
+ i2c_set_clientdata(client, charger);
+
+ ret = bq24735_read_word(client, BQ24735_MANUFACTURER_ID);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failed to read manufacturer id : %d\n",
+ ret);
+ goto err_free_name;
+ } else if (ret != 0x0040) {
+ dev_err(&client->dev,
+ "manufacturer id mismatch. 0x0040 != 0x%04x\n", ret);
+ ret = -ENODEV;
+ goto err_free_name;
+ }
+
+ ret = bq24735_read_word(client, BQ24735_DEVICE_ID);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failed to read device id : %d\n", ret);
+ goto err_free_name;
+ } else if (ret != 0x000B) {
+ dev_err(&client->dev,
+ "device id mismatch. 0x000b != 0x%04x\n", ret);
+ ret = -ENODEV;
+ goto err_free_name;
+ }
+
+ if (gpio_is_valid(charger->pdata->status_gpio)) {
+ ret = devm_gpio_request(&client->dev,
+ charger->pdata->status_gpio,
+ name);
+ if (ret) {
+ dev_err(&client->dev,
+ "Failed GPIO request for GPIO %d: %d\n",
+ charger->pdata->status_gpio, ret);
+ }
+
+ charger->pdata->status_gpio_valid = !ret;
+ }
+
+ ret = bq24735_config_charger(charger);
+ if (ret < 0) {
+ dev_err(&client->dev, "failed in configuring charger");
+ goto err_free_name;
+ }
+
+ /* check for AC adapter presence */
+ if (bq24735_charger_is_present(charger)) {
+ ret = bq24735_enable_charging(charger);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failed to enable charging\n");
+ goto err_free_name;
+ }
+ }
+
+ ret = power_supply_register(&client->dev, supply);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failed to register power supply: %d\n",
+ ret);
+ goto err_free_name;
+ }
+
+ if (client->irq) {
+ ret = devm_request_threaded_irq(&client->dev, client->irq,
+ NULL, bq24735_charger_isr,
+ IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING |
+ IRQF_ONESHOT,
+ supply->name, supply);
+ if (ret) {
+ dev_err(&client->dev,
+ "Unable to register IRQ %d err %d\n",
+ client->irq, ret);
+ goto err_unregister_supply;
+ }
+ }
+
+ return 0;
+err_unregister_supply:
+ power_supply_unregister(supply);
+err_free_name:
+ if (name != charger->pdata->name)
+ kfree(name);
+
+ return ret;
+}
+
+static int bq24735_charger_remove(struct i2c_client *client)
+{
+ struct bq24735 *charger = i2c_get_clientdata(client);
+
+ if (charger->client->irq)
+ devm_free_irq(&charger->client->dev, charger->client->irq,
+ &charger->charger);
+
+ power_supply_unregister(&charger->charger);
+
+ if (charger->charger.name != charger->pdata->name)
+ kfree(charger->charger.name);
+
+ return 0;
+}
+
+static const struct i2c_device_id bq24735_charger_id[] = {
+ { "bq24735-charger", 0 },
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, bq24735_charger_id);
+
+static const struct of_device_id bq24735_match_ids[] = {
+ { .compatible = "ti,bq24735", },
+ { /* end */ }
+};
+MODULE_DEVICE_TABLE(of, bq24735_match_ids);
+
+static struct i2c_driver bq24735_charger_driver = {
+ .driver = {
+ .name = "bq24735-charger",
+ .owner = THIS_MODULE,
+ .of_match_table = bq24735_match_ids,
+ },
+ .probe = bq24735_charger_probe,
+ .remove = bq24735_charger_remove,
+ .id_table = bq24735_charger_id,
+};
+
+module_i2c_driver(bq24735_charger_driver);
+
+MODULE_DESCRIPTION("bq24735 battery charging driver");
+MODULE_AUTHOR("Darbha Sriharsha <dsriharsha@xxxxxxxxxx>");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/power/bq24735-charger.h b/include/linux/power/bq24735-charger.h
new file mode 100644
index 0000000..f536164
--- /dev/null
+++ b/include/linux/power/bq24735-charger.h
@@ -0,0 +1,39 @@
+/*
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __CHARGER_BQ24735_H_
+#define __CHARGER_BQ24735_H_
+
+#include <linux/types.h>
+#include <linux/power_supply.h>
+
+struct bq24735_platform {
+ uint32_t charge_current;
+ uint32_t charge_voltage;
+ uint32_t input_current;
+
+ const char *name;
+
+ int status_gpio;
+ int status_gpio_active_low;
+ bool status_gpio_valid;
+
+ char **supplied_to;
+ size_t num_supplicants;
+};
+
+#endif /* __CHARGER_BQ24735_H_ */
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
