[PATCH v3 0/2] Add power control for lm90

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The device lm90 can be controlled by the vcc rail.
Add function to power on/off the vcc.

This series is v3, previous version patches are:
[v2]: http://www.spinics.net/lists/arm-kernel/msg265373.html
[v1]: http://www.mail-archive.com/linux-tegra@xxxxxxxxxxxxxxx/msg12034.html

Changes from v2:
1. use devm_regulator_get_optional(), as suggested by Mark.
2. remove the lm90_power_control(), enable the regulator in the probe()
directly, so the codes are more clear, as suggested by Alexander and Guenter.
3. change the binding documentation, as per Stephen suggestion.
4. couple of changes, as per previous review.

Changes from v1:
1. if get regulator failed, we should continue to run probe function,
not return fail.
2. call regulator_put() in error handler and remove function.
3. add LM90 DT binding document.

Wei Ni (2):
  hwmon: (lm90) Add power control
  Documentation: dt: hwmon: add OF document for LM90

 Documentation/devicetree/bindings/hwmon/lm90.txt |   44 ++++++++++++++++++++++
 drivers/hwmon/lm90.c                             |   25 ++++++++++++
 2 files changed, 69 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/lm90.txt

-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux