Use a firmware operation to set the CPU reset handler and only resort to
doing it ourselves if there is none defined.
This supports the booting of secondary CPUs on devices using a TrustZone
secure monitor.
Signed-off-by: Alexandre Courbot <acourbot@xxxxxxxxxx>
---
arch/arm/mach-tegra/reset.c | 17 ++++++++++++++---
1 file changed, 14 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c
index 6964117..fc9cf03 100644
--- a/arch/arm/mach-tegra/reset.c
+++ b/arch/arm/mach-tegra/reset.c
@@ -21,6 +21,7 @@
#include <asm/cacheflush.h>
#include <asm/hardware/cache-l2x0.h>
+#include <asm/firmware.h>
#include "iomap.h"
#include "irammap.h"
@@ -65,6 +66,7 @@ static void __init tegra_cpu_reset_handler_enable(void)
void __iomem *iram_base = IO_ADDRESS(TEGRA_IRAM_RESET_BASE);
const u32 reset_address = TEGRA_IRAM_RESET_BASE +
tegra_cpu_reset_handler_offset;
+ int err;
BUG_ON(is_enabled);
BUG_ON(tegra_cpu_reset_handler_size > TEGRA_IRAM_RESET_HANDLER_SIZE);
@@ -72,9 +74,18 @@ static void __init tegra_cpu_reset_handler_enable(void)
memcpy(iram_base, (void *)__tegra_cpu_reset_handler_start,
tegra_cpu_reset_handler_size);
- tegra_cpu_reset_handler_set(reset_address);
-
- is_enabled = true;
+ err = call_firmware_op(set_cpu_boot_addr, 0, reset_address);
+ switch (err) {
+ case -ENOSYS:
+ tegra_cpu_reset_handler_set(reset_address);
+ /* pass-through */
+ case 0:
+ is_enabled = true;
+ break;
+ default:
+ pr_crit("Cannot set CPU reset handler: %d\n", err);
+ BUG();
+ }
}
void __init tegra_cpu_reset_handler_init(void)
--
1.8.4
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
