Add hdmi node to Dalmore device tree to supply Dalmore-specific data: VDD and PLL regulators for HDMI port, DDC bus and HDMI cable hotplug GPIO. Signed-off-by: Mikko Perttunen <mperttunen@xxxxxxxxxx> --- arch/arm/boot/dts/tegra114-dalmore.dts | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index 6023028..50e6fb4 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -713,6 +713,17 @@ }; }; + host1x { + hdmi { + status = "okay"; + + vdd-supply = <&vdd_hdmi_reg>; + pll-supply = <&palmas_smps3_reg>; + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + }; + }; + serial@70006300 { status = "okay"; }; @@ -740,6 +751,10 @@ }; }; + hdmi_ddc: i2c@7000c700 { + status = "okay"; + }; + i2c@7000d000 { status = "okay"; clock-frequency = <400000>; @@ -1169,6 +1184,8 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; + regulator-always-on; + regulator-boot-on; gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>; vin-supply = <&tps65090_dcdc1_reg>; }; -- 1.8.1.5 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html