From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx> With the device tree support in place, probe the PCIe controller from the device tree and remove the corresponding workaround in the board file. Signed-off-by: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx> Signed-off-by: Thierry Reding <treding@xxxxxxxxxx> --- Changes in v2: - add missing dummy regulator nodes by Stephen Warren - rename port 0 DT node and disable unused port 1 arch/arm/boot/dts/tegra20-trimslice.dts | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 906e07f..cc3e742 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -310,6 +310,16 @@ nvidia,sys-clock-req-active-high; }; + pcie-controller { + status = "okay"; + pex-clk-supply = <&pci_clk_reg>; + vdd-supply = <&pci_vdd_reg>; + + pci@1,0 { + status = "okay"; + }; + }; + usb@c5000000 { status = "okay"; }; @@ -412,6 +422,24 @@ enable-active-high; gpio = <&gpio TEGRA_GPIO(V, 2) 0>; }; + + pci_clk_reg: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "pci_clk"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + pci_vdd_reg: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "pci_vdd"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + }; }; sound { -- 1.8.3.4 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html