Re: [PATCH 1/2] hwmon: (lm90) Add power control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 08/07/2013 03:03 PM, Guenter Roeck wrote:
> On 08/06/2013 11:52 PM, Wei Ni wrote:
>> The device lm90 can be controlled by the vdd rail.
>> Adding the power control support to power on/off the vdd rail.
>> And make sure that power is enabled before accessing the device.
>>
>> Signed-off-by: Wei Ni <wni@xxxxxxxxxx>
>> ---
>>   drivers/hwmon/lm90.c |   52 ++++++++++++++++++++++++++++++++++++++++++++++++++
>>   1 file changed, 52 insertions(+)
>>
>> diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
>> index cdff742..eeb0115 100644
>> --- a/drivers/hwmon/lm90.c
>> +++ b/drivers/hwmon/lm90.c
>> @@ -89,6 +89,8 @@
>>   #include <linux/err.h>
>>   #include <linux/mutex.h>
>>   #include <linux/sysfs.h>
>> +#include <linux/delay.h>
>> +#include <linux/regulator/consumer.h>
>>
>>   /*
>>    * Addresses to scan
>> @@ -179,6 +181,8 @@ enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680,
>>   #define LM90_HAVE_TEMP3		(1 << 6) /* 3rd temperature sensor	*/
>>   #define LM90_HAVE_BROKEN_ALERT	(1 << 7) /* Broken alert		*/
>>
>> +#define POWER_ON_DELAY 20 /*ms*/
>> +
>>   /*
>>    * Driver data (common to all clients)
>>    */
>> @@ -302,6 +306,7 @@ static const struct lm90_params lm90_params[] = {
>>   struct lm90_data {
>>   	struct device *hwmon_dev;
>>   	struct mutex update_lock;
>> +	struct regulator *lm90_reg;
>>   	char valid; /* zero until following fields are valid */
>>   	unsigned long last_updated; /* in jiffies */
>>   	int kind;
>> @@ -1391,6 +1396,48 @@ static void lm90_init_client(struct i2c_client *client)
>>   		i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1, config);
>>   }
>>
>> +static int lm90_power_control(struct i2c_client *client, bool is_enable)
>> +{
>> +	struct lm90_data *data = i2c_get_clientdata(client);
>> +	int ret;
>> +
>> +	mutex_lock(&data->update_lock);
>> +
>> +	if (!data->lm90_reg) {
>> +		data->lm90_reg = regulator_get(&client->dev, "vdd");
>> +		if (IS_ERR_OR_NULL(data->lm90_reg)) {
>> +			if (PTR_ERR(data->lm90_reg) == -ENODEV)
>> +				dev_info(&client->dev,
>> +					 "No regulator found for vdd. Assuming vdd is always powered.");
>> +			else
>> +				dev_warn(&client->dev,
>> +					 "Error [%ld] in getting the regulator handle for vdd.\n",
>> +					 PTR_ERR(data->lm90_reg));
>> +			data->lm90_reg = NULL;
>> +			mutex_unlock(&data->update_lock);
>> +			return -ENODEV;
> 
> I don't think it is acceptable to have the driver fail on pretty much all PCs.

Yes, you are right, I didn't consider it carefully, I will fix it.
I think it's better to move these codes to the probe() directly.

> 
> Also, I dislike that - even if the calling code doesn't fail - the above message would be displayed on unload as well.
> 
> In general, the 'unload' flag seems unnecessary. You could just call
> 
> 	if (data->lm90_reg)
> 		regulator_disable();
> 
> in the remove function. In addition to that, shouldn't you call regulator_put() on exit ?

Oh, sorry, I miss the regulator_put(), I will fix it.

> Also, I am missing error handling in the probe function; if something else fails,
> the regulator is neither disabled nor released.

It looks this patch have many problems, I will fix them.
Thanks for your comments.

> 
> Guenter
> 
>> +		}
>> +	}
>> +	if (is_enable) {
>> +		ret = regulator_enable(data->lm90_reg);
>> +		msleep(POWER_ON_DELAY);
>> +	} else {
>> +		ret = regulator_disable(data->lm90_reg);
>> +	}
>> +
>> +	if (ret < 0)
>> +		dev_err(&client->dev,
>> +			"Error in %s rail vdd, error %d\n",
>> +			(is_enable) ? "enabling" : "disabling", ret);
>> +	else
>> +		dev_info(&client->dev, "success in %s rail vdd\n",
>> +			 (is_enable) ? "enabling" : "disabling");
>> +
>> +	mutex_unlock(&data->update_lock);
>> +
>> +	return ret;
>> +}
>> +
>>   static int lm90_probe(struct i2c_client *client,
>>   		      const struct i2c_device_id *id)
>>   {
>> @@ -1406,6 +1453,10 @@ static int lm90_probe(struct i2c_client *client,
>>   	i2c_set_clientdata(client, data);
>>   	mutex_init(&data->update_lock);
>>
>> +	err = lm90_power_control(client, true);
>> +	if (err < 0)
>> +		return err;
>> +
>>   	/* Set the device type */
>>   	data->kind = id->driver_data;
>>   	if (data->kind == adm1032) {
>> @@ -1483,6 +1534,7 @@ static int lm90_remove(struct i2c_client *client)
>>   	hwmon_device_unregister(data->hwmon_dev);
>>   	lm90_remove_files(client, data);
>>   	lm90_restore_conf(client, data);
>> +	lm90_power_control(client, false);
>>
>>   	return 0;
>>   }
>>
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux