On 07/23/2013 10:10 PM, Richard Zhao wrote: > - add tegra_dma_filter_data to specify dma info > DMA DT binding needs the device that raise dma request and dma name > to request a dma channel. tegra30_i2s is a special case. It should be ahub > device and it also has dma name that cannot handled by ASoC dmaengine code. > So we pass the info using filter data in snd_dmaengine_dai_dma_data. > - change i2s/ac97 drivers to use generic DT binding > - tegra30_i2s: alloc ahub tx/rx fifo at driver probe time > diff --git a/sound/soc/tegra/tegra30_i2s.c b/sound/soc/tegra/tegra30_i2s.c I don't understand why the FIFO alloc/free had to move from startup()/shutdown() to probe()/remove(). This will prevent later changes from making the connectivity between the AHUB FIFOs and I2S modules more dynamic, which is kind of the whole point of the AHUB HW module. > diff --git a/sound/soc/tegra/tegra_pcm.h b/sound/soc/tegra/tegra_pcm.h > +#define TEGRA_DMA_NAME_MAX_LEN 10 > + > +/* > + * Generic DMA DT binding needs the device that raise dma request and dma name > + * to request a dma channel. tegra30_i2s is a special case. It should be ahub > + * device and it also has dma name that cannot handled by ASoC dmaengine code. > + * So we pass the info using filter data in snd_dmaengine_dai_dma_data. > + */ > +struct tegra_dma_filter_data { > + struct device *dma_dev; > + char dma_name[TEGRA_DMA_NAME_MAX_LEN]; > +}; I agree with Lars-Peter's comment that it'd be better to enhance the ASoC dmaengine support to allow the channel name to be specified so we don't need to much custom code. And that should use "char *" not a fixed-length array. -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html