The common LP1 resuming procedures of LP1 on Tegra was checking the LP1 mask first. The LP1 mask indicated that the Tegra device was in LP1 then we need to resume the Tegra from the LP1 reset handler. And the LP1 was putting the SDRAM to self-refresh mode, the SDRAM wasn't accessible when resuming from LP1. We need to copy the LP1 reset handler to IRAM before suspending. That's why you can see the address of LP1 reset handler was located in IRAM. Signed-off-by: Joseph Lo <josephl@xxxxxxxxxx> --- arch/arm/mach-tegra/reset-handler.S | 13 +++++++++++++ arch/arm/mach-tegra/reset.c | 2 ++ arch/arm/mach-tegra/sleep.h | 2 ++ 3 files changed, 17 insertions(+) diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S index 34614bd..492b10f 100644 --- a/arch/arm/mach-tegra/reset-handler.S +++ b/arch/arm/mach-tegra/reset-handler.S @@ -182,6 +182,19 @@ after_errata: 1: #endif + /* Waking up from LP1? */ + ldr r8, [r12, #RESET_DATA(MASK_LP1)] + tst r8, r11 @ if in_lp1 + beq __is_not_lp1 + cmp r10, #0 + bne __die @ only CPU0 can be here + ldr lr, [r12, #RESET_DATA(STARTUP_LP1)] + THUMB( add lr, lr, #1 ) @ switch to Thumb mode + cmp lr, #0 + bleq __die @ no LP1 startup handler + bx lr +__is_not_lp1: + /* Waking up from LP2? */ ldr r9, [r12, #RESET_DATA(MASK_LP2)] tst r9, r11 @ if in_lp2 diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c index 1ac434e..fd0bbf8 100644 --- a/arch/arm/mach-tegra/reset.c +++ b/arch/arm/mach-tegra/reset.c @@ -81,6 +81,8 @@ void __init tegra_cpu_reset_handler_init(void) #endif #ifdef CONFIG_PM_SLEEP + __tegra_cpu_reset_handler_data[TEGRA_RESET_STARTUP_LP1] = + TEGRA_IRAM_CODE_AREA; __tegra_cpu_reset_handler_data[TEGRA_RESET_STARTUP_LP2] = virt_to_phys((void *)tegra_resume); #endif diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h index e907e40..e7f8b6f 100644 --- a/arch/arm/mach-tegra/sleep.h +++ b/arch/arm/mach-tegra/sleep.h @@ -29,6 +29,8 @@ + IO_APB_VIRT) #define TEGRA_PMC_VIRT (TEGRA_PMC_BASE - IO_APB_PHYS + IO_APB_VIRT) +#define TEGRA_IRAM_CODE_AREA (TEGRA_IRAM_BASE + SZ_4K) + /* PMC_SCRATCH37-39 and 41 are used for tegra_pen_lock and idle */ #define PMC_SCRATCH37 0x130 #define PMC_SCRATCH38 0x134 -- 1.8.3.4 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html