From: Stephen Warren <swarren@xxxxxxxxxx> I'm planning to remove CONFIG_ARCH_TEGRA_*_SOC, leaving just ARCH_TEGRA. This will reduce the number of configurations that need to be supported by core Tegra code, e.g. CPU idle, hotplug. As a precursor, we need to update Kconfig for all Tegra drivers not to reference ARCH_TEGRA_*_SOC. Stop selecting I2S/AC97/SPDIF controller drivers from the machine driver config options; this doesn't really work if we don't know which specific SoC(s) we're building for. However, set their default values based on SND_SOC_TEGRA, since most people will probably want to enable support for all SoCs. This also avoids the need to change any defconfig files. Signed-off-by: Stephen Warren <swarren@xxxxxxxxxx> --- sound/soc/tegra/Kconfig | 36 +++++++++++++++--------------------- 1 file changed, 15 insertions(+), 21 deletions(-) diff --git a/sound/soc/tegra/Kconfig b/sound/soc/tegra/Kconfig index 68fd6d0..321a6c9 100644 --- a/sound/soc/tegra/Kconfig +++ b/sound/soc/tegra/Kconfig @@ -7,8 +7,9 @@ config SND_SOC_TEGRA Say Y or M here if you want support for SoC audio on Tegra. config SND_SOC_TEGRA20_AC97 - tristate - depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC + tristate "Tegra20 AC97 controller" + depends on SND_SOC_TEGRA + default SND_SOC_TEGRA select SND_SOC_AC97_BUS select SND_SOC_TEGRA20_DAS help @@ -18,15 +19,16 @@ config SND_SOC_TEGRA20_AC97 config SND_SOC_TEGRA20_DAS tristate - depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC + depends on SND_SOC_TEGRA help Say Y or M if you want to add support for the Tegra20 DAS module. You will also need to select the individual machine drivers to support below. config SND_SOC_TEGRA20_I2S - tristate - depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC + tristate "Tegra20 I2C controller" + depends on SND_SOC_TEGRA + default SND_SOC_TEGRA select SND_SOC_TEGRA20_DAS help Say Y or M if you want to add support for codecs attached to the @@ -34,9 +36,9 @@ config SND_SOC_TEGRA20_I2S machine drivers to support below. config SND_SOC_TEGRA20_SPDIF - tristate - depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC - default m + tristate "Tegra20 SPDIF controller" + default SND_SOC_TEGRA + depends on SND_SOC_TEGRA help Say Y or M if you want to add support for the Tegra20 SPDIF interface. You will also need to select the individual machine drivers to support @@ -44,15 +46,16 @@ config SND_SOC_TEGRA20_SPDIF config SND_SOC_TEGRA30_AHUB tristate - depends on SND_SOC_TEGRA && ARCH_TEGRA_3x_SOC + depends on SND_SOC_TEGRA help Say Y or M if you want to add support for the Tegra20 AHUB module. You will also need to select the individual machine drivers to support below. config SND_SOC_TEGRA30_I2S - tristate - depends on SND_SOC_TEGRA && ARCH_TEGRA_3x_SOC + tristate "Tegra30 I2S controller" + depends on SND_SOC_TEGRA + default SND_SOC_TEGRA select SND_SOC_TEGRA30_AHUB help Say Y or M if you want to add support for codecs attached to the @@ -62,8 +65,6 @@ config SND_SOC_TEGRA30_I2S config SND_SOC_TEGRA_RT5640 tristate "SoC Audio support for Tegra boards using an RT5640 codec" depends on SND_SOC_TEGRA && I2C && GPIOLIB - select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC - select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC select SND_SOC_RT5640 help Say Y or M here if you want to add support for SoC audio on Tegra @@ -72,8 +73,6 @@ config SND_SOC_TEGRA_RT5640 config SND_SOC_TEGRA_WM8753 tristate "SoC Audio support for Tegra boards using a WM8753 codec" depends on SND_SOC_TEGRA && I2C && GPIOLIB - select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC - select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC select SND_SOC_WM8753 help Say Y or M here if you want to add support for SoC audio on Tegra @@ -82,8 +81,6 @@ config SND_SOC_TEGRA_WM8753 config SND_SOC_TEGRA_WM8903 tristate "SoC Audio support for Tegra boards using a WM8903 codec" depends on SND_SOC_TEGRA && I2C && GPIOLIB - select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC - select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC select SND_SOC_WM8903 help Say Y or M here if you want to add support for SoC audio on Tegra @@ -92,8 +89,7 @@ config SND_SOC_TEGRA_WM8903 config SND_SOC_TEGRA_WM9712 tristate "SoC Audio support for Tegra boards using a WM9712 codec" - depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC && GPIOLIB - select SND_SOC_TEGRA20_AC97 + depends on SND_SOC_TEGRA && GPIOLIB select SND_SOC_WM9712 help Say Y or M here if you want to add support for SoC audio on Tegra @@ -102,7 +98,6 @@ config SND_SOC_TEGRA_WM9712 config SND_SOC_TEGRA_TRIMSLICE tristate "SoC Audio support for TrimSlice board" depends on SND_SOC_TEGRA && I2C - select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC select SND_SOC_TLV320AIC23 help Say Y or M here if you want to add support for SoC audio on the @@ -111,7 +106,6 @@ config SND_SOC_TEGRA_TRIMSLICE config SND_SOC_TEGRA_ALC5632 tristate "SoC Audio support for Tegra boards using an ALC5632 codec" depends on SND_SOC_TEGRA && I2C && GPIOLIB - select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC select SND_SOC_ALC5632 help Say Y or M here if you want to add support for SoC audio on the -- 1.8.1.5 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
